Condition Monitoring and Identification of Misalignment with Initial Unbalance of Flexible Rotor-Bearing System

被引:0
作者
Singh, Sankalp [1 ]
Phadatare, Hanmant P. [1 ]
Pratiher, Barun [1 ]
机构
[1] Indian Inst Technol, Dept Mech Engn, Jodhpur 342037, Rajasthan, India
来源
MACHINES, MECHANISM AND ROBOTICS, INACOMM 2019 | 2022年
关键词
Modal analysis; Unbalance; Misalignment; Condition monitoring; Identification; VIBRATION ANALYSIS; FAULT-DETECTION; MODEL;
D O I
10.1007/978-981-16-0550-5_119
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Shaft misalignment, rotor unbalance, rubbing, bearing faults and cracks are the commonly observed faults in the rotor-bearing systems. Vibration signature has been considered to be one of the best ways to detect and diagnosis subsequent condition monitoring of rotor-bearing faults. A flexible shaft with a rigid disc supported by flexible bearings at both the ends has been considered for the present critical observations. The bearing is considered as a spring with linear stiffness and damping. Further, Timoshenko beam theory is considered to describe mathematically the model of rotor element. We used finite element analysis to obtain the critical whirling speeds of rotor-bearing system for different modes at various system parameters with the illustration of Campbell diagram and Fourier spectrum. Vibration spectrums in the transverse direction are illustrated for different modes of vibration using successive approaches of Hamilton principle, Galerkin's method and Newmark's integral method. Condition monitoring of vibration spectrums considering rotor unbalance and shaft misalignment as well as their identification has been analysed with FFT, time responses, phase portrait and Poincare's map, numerically and experimentally.
引用
收藏
页码:1243 / 1259
页数:17
相关论文
共 21 条
  • [1] [Anonymous], 2004, FUNDAMENTALS FINITE
  • [2] [Anonymous], 2007, Shaft Alignment Handbook
  • [3] Fault detection in rotor bearing systems using time frequency techniques
    Chandra, N. Harish
    Sekhar, A. S.
    [J]. MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2016, 72-73 : 105 - 133
  • [4] Choudhary B, 2015, P 9 IFTOMM INT C ROT, V21, P1677
  • [5] Gibbons C.B, 1976, P 5 TURBOMACHINERY S, P111
  • [6] Trends in the application of model-based fault detection and diagnosis of technical processes
    Isermann, R
    Balle, P
    [J]. CONTROL ENGINEERING PRACTICE, 1997, 5 (05) : 709 - 719
  • [7] Experimental verification of Jeffcott rotor model with preloaded snubber ring
    Karpenko, E. V.
    Wiercigroch, M.
    Pavlovskaia, E. E.
    Neilson, R. D.
    [J]. JOURNAL OF SOUND AND VIBRATION, 2006, 298 (4-5) : 907 - 917
  • [8] Mohanty A. R., 2015, IFAC - Papers Online, V48, P554, DOI 10.1016/j.ifacol.2015.09.584
  • [9] Mohanty AR, 2015, MACHINERY CONDITION MONITORING: PRINCIPLES AND PRACTICES, P1
  • [10] DYNAMICS OF ROTO-BEARING SYSTEMS USING FINITE-ELEMENTS
    NELSON, HD
    MCVAUGH, JM
    [J]. JOURNAL OF ENGINEERING FOR INDUSTRY-TRANSACTIONS OF THE ASME, 1976, 98 (02): : 593 - 600