3D Transient Thermal Modelling and Experimental Validation of the Temperature Distribution During Laser Heating of Ti6Al4V Alloy

被引：1
|
作者：
Yang, Jihong [1 ]
Sun, Shoujin [1 ]
Brandt, Milan [2 ]
Yan, Wenyi [3 ]
机构：
[1] Swinburne Univ Technol, CAST Cooperat Res Ctr, Ind Res Inst IRIS, POB 218 H66, Hawthorn, Vic 3122, Australia
[2] RMIT Univ, Mech & Mfg Engn, Sch Aerosp, Bundoora, Vic 3083, Australia
[3] Monash Univ, Dept Mech & Aerosp Engn, Clayton, Vic 3800, Australia
来源：
PRICM 7, PTS 1-3 | 2010年 / 654-656卷
关键词：
Finite element modelling; temperature distribution; laser heating; Ti6Al4V alloy; TITANIUM;
D O I：
10.4028/www.scientific.net/MSF.654-656.894
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
A three 3D transient finite element model has been developed to predict the temperature distribution in Ti6Al4V alloy plate workpiece. It is found that the temperature profile is strongly dependent on the parameters of the laser beam and material properties. Also the thermal model results were compared with results produced by experimental work and these show close agreement.
引用
收藏
页码：894 / +
页数：2
相关论文
共 50 条
  • [31] Laser surface texturing of Ti6Al4V alloy, stainless steel and aluminium silicon alloy
    Grabowski, Andrzej
    Sozanska, Maria
    Adamiak, Marcin
    Kepinska, Miroslawa
    Florian, Tomasz
    APPLIED SURFACE SCIENCE, 2018, 461 : 117 - 123
  • [32] Finite element analysis of thermal behavior and experimental investigation of Ti6Al4V in selective laser melting
    Li, Junfeng
    Wei, Zhengying
    Yang, Lixiang
    Zhou, Bokang
    Wu, Yunxiao
    Chen, Sheng-Gui
    Sun, Zhenzhong
    OPTIK, 2020, 207
  • [33] In-situ formation of laser Ti6Al4V-TiB composite coatings on Ti6Al4V alloy for biomedical application
    Popoola, A. P. I.
    Phume, L.
    Pityana, S.
    Aigbodion, V. S.
    SURFACE & COATINGS TECHNOLOGY, 2016, 285 : 161 - 170
  • [34] Effect of Surface Modifications on Surface Roughness of Ti6Al4V Alloy Manufactured by 3D Printing, Casting, and Wrought
    Konya, Janos
    Hargitai, Hajnalka
    Jaber, Hassanen
    Pinke, Peter
    Kovacs, Tunde Anna
    MATERIALS, 2023, 16 (11)
  • [35] Magnetic Field-Assisted Laser Shock Peening of Ti6Al4V Alloy
    He, Guangzhi
    Qian, Chengkai
    Cai, Zhipeng
    Li, Kejian
    Liu, Qu
    Yan, Jianfeng
    ADVANCED ENGINEERING MATERIALS, 2023, 25 (10)
  • [36] Study on Wear and Corrosion Properties of Ti6Al4V Alloy by Laser Gas Nitriding
    Zhang Chunhua
    Tang Liwen
    Hu Fang
    Zhang Song
    Man Hauchung
    MATERIALS AND MANUFACTURING, PTS 1 AND 2, 2011, 299-300 : 188 - +
  • [37] Modeling of phase transformations of Ti6Al4V during laser metal deposition
    Suarez, A.
    Tobar, M. J.
    Yanez, A.
    Perez, I.
    Sampedro, J.
    Amigo, V.
    Candel, J. J.
    LASERS IN MANUFACTURING 2011: PROCEEDINGS OF THE SIXTH INTERNATIONAL WLT CONFERENCE ON LASERS IN MANUFACTURING, VOL 12, PT A, 2011, 12 : 666 - 673
  • [38] In vitro bioactivity and biocompatibility of femtosecond laser-modified Ti6Al4V alloy
    Shaikh, Shazia
    Kedia, Sunita
    Majumdar, Ananda Guha
    Subramanian, Mahesh
    Sinha, Sucharita
    APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 2018, 124 (12):
  • [39] Influence of Surface Pre-treatments on Laser Welding of Ti6Al4V Alloy
    Sanchez-Amaya, J. M.
    Amaya-Vazquez, M. R.
    Gonzalez-Rovira, L.
    Botana-Galvin, M.
    Botana, F. J.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2014, 23 (05) : 1568 - 1575
  • [40] Microstructural characteristics and mechanical properties of Ti6Al4V alloy fiber laser welds
    Campanelli, Sabina L.
    Casalino, Giuseppe
    Mortello, Michelangelo
    Angelastro, Andrea
    Ludovico, Antonio Domenico
    9TH CIRP CONFERENCE ON INTELLIGENT COMPUTATION IN MANUFACTURING ENGINEERING - CIRP ICME '14, 2015, 33 : 428 - 433
12345