3D Transient Thermal Modelling and Experimental Validation of the Temperature Distribution During Laser Heating of Ti6Al4V Alloy

被引：1
|
作者：
Yang, Jihong [1 ]
Sun, Shoujin [1 ]
Brandt, Milan [2 ]
Yan, Wenyi [3 ]
机构：
[1] Swinburne Univ Technol, CAST Cooperat Res Ctr, Ind Res Inst IRIS, POB 218 H66, Hawthorn, Vic 3122, Australia
[2] RMIT Univ, Mech & Mfg Engn, Sch Aerosp, Bundoora, Vic 3083, Australia
[3] Monash Univ, Dept Mech & Aerosp Engn, Clayton, Vic 3800, Australia
来源：
PRICM 7, PTS 1-3 | 2010年 / 654-656卷
关键词：
Finite element modelling; temperature distribution; laser heating; Ti6Al4V alloy; TITANIUM;
D O I：
10.4028/www.scientific.net/MSF.654-656.894
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
A three 3D transient finite element model has been developed to predict the temperature distribution in Ti6Al4V alloy plate workpiece. It is found that the temperature profile is strongly dependent on the parameters of the laser beam and material properties. Also the thermal model results were compared with results produced by experimental work and these show close agreement.
引用
收藏
页码：894 / +
页数：2
相关论文
共 50 条
  • [21] Laser surface processing of Ti6Al4V alloy precoated with hard particles
    Yilbas, Bekir Sami
    OPTICS AND LASER TECHNOLOGY, 2022, 153
  • [22] Thermal stability and in vitro bioactivity of Ti-Al-V-O nanostructures fabricated on Ti6Al4V alloy
    Li, Yan
    Ding, Dongyan
    Ning, Congqin
    Bai, Shuo
    Huang, Lin
    Li, Ming
    Mao, Dali
    NANOTECHNOLOGY, 2009, 20 (06)
  • [23] In vitro bioactivity of laser surface-treated Ti6Al4V alloy
    Yoruc, Afife Binnaz Hazar
    Kelesoglu, Ergun
    Yildiz, Harika Eksioglu
    LASERS IN MEDICAL SCIENCE, 2019, 34 (08) : 1567 - 1573
  • [24] Laser Welding of Ti6Al4V Titanium Alloy in Air and a Water Medium
    Alhajhamoud, Mohamad
    Ozbey, Sayit
    Ilgaz, Mehmet Alp
    Candan, Levent
    Cinar, Ibrahim
    Vukotic, Mario
    Corovic, Selma
    Miljavec, Damijan
    Kayahan, Ersin
    MATERIALS, 2022, 15 (24)
  • [25] Microstructure and high temperature oxidation resistance of TiN/Ti3Al intermetallic composite coatings on Ti6Al4V alloy by laser cladding
    Zhang Xiaowei
    Liu Hongxi
    Wang Chuanqi
    Zeng Weihua
    Jiang Yehua
    HIGH-POWER LASERS AND APPLICATIONS V, 2010, 7843
  • [26] Theoretical and experimental investigations of ultra-short pulse laser interaction on Ti6Al4V alloy
    Kumar, K. Kiran
    Samuel, G. L.
    Shunmugam, M. S.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2019, 263 : 266 - 275
  • [27] Development of Tailored Porous Ti6Al4V Materials by Extrusion 3D Printing
    Olmos, Luis
    Gonzalez-Pedraza, Ana Silvia
    Vergara-Hernandez, Hector Javier
    Bouvard, Didier
    Lopez-Cornejo, Monserrat Sofia
    Servin-Castaneda, Rumualdo
    MATERIALS, 2025, 18 (02)
  • [28] Synthesis of TiN/Ti3Al composite coatings on Ti6Al4V alloy by plasma spraying and laser nitriding
    Zhang, X. C.
    Liu, Z. D.
    Xu, J. S.
    Xuan, F. Z.
    Wang, Z. D.
    Tu, S. T.
    SURFACE & COATINGS TECHNOLOGY, 2013, 228 : S107 - S110
  • [29] Effect of thermal-fluidic transport on the temperature distribution and the melt pool in laser powder bed fusion of Ti6Al4V
    Ji, Xia
    Zhang, Shiting
    Wang, Yongfu
    Liang, Steven Y.
    OPTICS AND LASER TECHNOLOGY, 2022, 156
  • [30] 3D Simulation of Laser Assisted Side Milling of Ti6Al4V Alloy using Modified Johnson-Cook Material Model
    Zamani, Hassan
    Hermani, Jan-Patrick
    Sonderegger, Bernhard
    Sommitsch, Christof
    CURRENT STATE-OF-THE-ART ON MATERIAL FORMING: NUMERICAL AND EXPERIMENTAL APPROACHES AT DIFFERENT LENGTH-SCALES, PTS 1-3, 2013, 554-557 : 2054 - 2061
12345