Performance of Silicon carbide whisker reinforced ceramic inserts on Inconel 718 in end milling process

被引：1
|
作者：
Reddy, M. M. [1 ]
Joshua, C. X. H. [1 ]
机构：
[1] Curtin Univ, Fac Sci & Engn, Sarawak, Malaysia
来源：
10TH CURTIN UNIVERSITY TECHNOLOGY SCIENCE AND ENGINEERING INTERNATIONAL CONFERENCE (CUTSE2015) | 2016年 / 121卷
关键词：
D O I：
10.1088/1757-899X/121/1/012005
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
An experimental investigation is planned in order to study the machinability of Inconel 718 with silicon carbide whisker reinforced ceramic inserts in end milling process. The relationship between the cutting speed, feed rate, and depth of cut against the response factors are studied to show the level of significance of each parameter. The cutting parameters are optimized by using Taguchi method. Implementing analysis of variance, the parameter which influences the surface roughness the most is determined to be the cutting speed, followed by the feed rate and depth of cut. Meanwhile, the optimal cutting condition is determined to have high cutting speed, low feed rate, and high depth of cut in the range of selected parameters.
引用
收藏
页数：6
相关论文
共 50 条
  • [1] Comparison of Sialon and silicon carbide whisker reinforced alumina ceramic for high-speed milling of Inconel 718
    Arunachalam, RM
    Mannan, MA
    TRANSACTIONS OF THE NORTH AMERICAN MANUFACTURING RESEARCH INSTITUTE OF SME, VOL XXVIII, 2000, 2000, : 119 - 124
  • [2] Turning of Cast Inconel 718 with Coated Carbide and Whisker Reinforced Ceramic Tools
    He Linjiang
    Xu Jiuhua
    Su Honghua
    Chen Yan
    ADVANCES IN MATERIALS MANUFACTURING SCIENCE AND TECHNOLOGY XV, 2014, 770 : 136 - 140
  • [3] High speed facing of age hardened Inconel 718 using silicon carbide whisker reinforced ceramic tools
    Arunachalam, RM
    Mannan, MA
    TRANSACTIONS OF THE NORTH AMERICAN MANUFACTURING RESEARCH INSTITUTE OF SME, VOL XXX, 2002, 2002, : 345 - 352
  • [4] An innovative methodology for the performance evaluation of coated cemented carbide inserts in milling of Inconel 718
    Bouzakis, K.-D.
    Michailidis, N.
    Gerardis, S.
    Batsiolas, M.
    Papa, M.
    Lili, E.
    Mirisidis, J.
    Mueller, J.
    Cremer, R.
    CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2007, 56 (01) : 77 - 80
  • [5] Progressive Tool Failure in High Speed End Milling of Inconel 718 with Coated Carbide Inserts
    Li, A. H.
    Zhao, J.
    Pei, Z. Q.
    Cuo, S. G.
    HIGH SPEED MACHINING, 2011, 188 : 32 - +
  • [6] Experimental Investigation on Tool Wear When End-milling Inconel 718 with Coated Carbide Inserts
    Wang, Y. W.
    Li, J. F.
    Li, Z. M.
    Ding, T. C.
    Zhang, S.
    HIGH SPEED MACHINING, 2011, 188 : 410 - +
  • [7] High speed cutting of Inconel 718 with coated carbide and ceramic inserts
    Li, L
    He, N
    Wang, M
    Wang, ZG
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2002, 129 (1-3) : 127 - 130
  • [8] Laser-assisted machining of Inconel 718 with carbide and ceramic inserts
    Germain, G.
    Lebrun, J. L.
    Braham-Bouchnak, T.
    Bellett, D.
    Auger, S.
    INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2008, 1 (Suppl 1) : 523 - 526
  • [9] High Speed Cutting Inconel 718 with Coated Carbide and Ceramic Inserts
    LI Liang
    厦门大学学报(自然科学版), 2002, (S1) : 44 - 45
  • [10] Laser-assisted machining of Inconel 718 with carbide and ceramic inserts
    G. Germain
    J. L. Lebrun
    T. Braham-Bouchnak
    D. Bellett
    S. Auger
    International Journal of Material Forming, 2008, 1 : 523 - 526
12345