Comparison between FEM & Analytical Modelsof Active Magnetic Bearing

被引：0
作者：
Bruzzese, C. [1 ]
Marcolini, F. [1 ]
Santini, E. [1 ]
Sferro, G. [1 ]
Trentini, F. [1 ]
机构：
[1] SAPIENZA Univ Roma, Dipartimento Ingn Elettr, Rome, Italy
来源：
2018 INTERNATIONAL SYMPOSIUM ON POWER ELECTRONICS, ELECTRICAL DRIVES, AUTOMATION AND MOTION (SPEEDAM) | 2018年
关键词：
Energy storage; Flywheel; Active magnetic bearings; 8-pholes; FEM; Mathematical Model; DESIGN;
D O I：
暂无
中图分类号：
TP [自动化技术、计算机技术];
学科分类号：
0812 ;
摘要：
Thispaper compaerethe analytical mathematical model of active magnetic bearings (AMBs) with a FEM based model, developed in the framework of the Ansys (c) software. In both analyses, attention will be given to the force generated by the bearings on the rotor of a synchronous machine coupled with a flywheel (the purpose of this system is the storage of energy using all the possible advantages offered byAMBs). Firstly, it is necessary to represent the basic mathematical model of an AMB and its application on both flat and cylindrical geometry. Secondly, FEM simulations are performed and the relevant results are compared. Then, Energy Storage System (ESS) shall meet the requirements set out in advance. Finally, all the results based on the mathematical model are used to studya real system.
引用
收藏
页码：1125 / 1130
页数：6
相关论文
共 6 条
  • [1] Optimal design of a three-pole active magnetic bearing
    Chen, SL
    Hsu, CT
    [J]. IEEE TRANSACTIONS ON MAGNETICS, 2002, 38 (05) : 3458 - 3466
  • [2] Fu ZS, 2016, IEEE INT POWER ELEC, P786, DOI 10.1109/IPEMC.2016.7512385
  • [3] Ghiringhelli S, 2016, 2016 INTERNATIONAL SYMPOSIUM ON POWER ELECTRONICS, ELECTRICAL DRIVES, AUTOMATION AND MOTION (SPEEDAM), P540
  • [4] Hawkins L., J JAPAN SOC APPL ELE, V16, P287
  • [5] Optimum magnetic bearing design considering performance limitations
    Hsiao, FZ
    Fan, CC
    Chieng, WH
    Lee, AC
    [J]. JSME INTERNATIONAL JOURNAL SERIES C-DYNAMICS CONTROL ROBOTICS DESIGN AND MANUFACTURING, 1996, 39 (03): : 586 - 596
  • [6] Schweitzer G., 2010, Magnetic Bearings: Theory, Design and Application to Rotating Machinery
1