Life Cycle Assessment Model of a Catering Product: Comparing Environmental Impacts for Different End-of-Life Scenarios

This paper assesses the primary energy and environmental impacts of a restaurant main course product's lifecycle, especially focusing on end-of-life (EoL) stage. In the first step, a cradle-to-grave complex life cycle assessment (LCA) model of the product has been set up from the extraction of the required raw materials through the preparation, cooking and use phase to the end-of-life. In the second step, three scenarios (landfilling, incineration, and composting) were compared for the generated food waste in the end-of-life stage given that one of the biggest challenges in waste management is the optimal management of food waste. We calculated eleven environmental impact categories for the examined food product with the help of GaBi 9.0 software. During our research work, the primary energy was examined in each phase. In the third step, a comparison between the traditional and "sous vide" cooking technologies has been created to optimise of the cooking/frying life cycle phase. This paper basically answers three main questions: (1) How can the main environmental impacts and primary energy throughout the whole life cycle of the examined product be characterised? (2) What methods can optimise the different life cycle stages while reducing and recycling energy and material streams? and (3) what is the most optimal waste management scenario at the end-of-life stage? Based on the analysis, the highest environmental impact comes from the preparation phase and the end-of-life scenario for the traditional incineration caused almost twice the environmental load as the landfilling of the food waste. Composting has the lowest environmental impact, and the value of the primary energy for composting is very low. The sous vide cooking technique is advantageous, and the continuously controlled conditions result in a more reliable process. These research results can be used to design sustainable cooking and catering with lower environmental impacts and energy resources in catering units.