Identifying bubble occurrence during pool boiling employing acoustic emission technique

被引:23
作者
Alhashan, Taihiret [1 ]
Addali, Abdulmajid [1 ]
Teixeira, Joao Amaral [1 ]
Elhashan, Said [2 ]
机构
[1] Cranfield Univ, Sch Energy, Cranfield MK43 0AL, Beds, England
[2] Higher Inst Mech Engn, Tripoli, Libya
关键词
Pool boiling; Bubble formation; Acoustic emission; INCIPIENT CAVITATION; WATER; BEARING; SURFACE; VALVE;
D O I
10.1016/j.apacoust.2017.11.006
中图分类号
O42 [声学];
学科分类号
070206 ; 082403 ;
摘要
This paper reports the results of a study for the early detection of bubble formation during the boiling process using acoustic emission. The feasibility of using AE technology to detect and monitor early bubble formation during pool boiling is assessed, and the results show that AE technology is an affective tool for this purpose. There is a clear correlation between the AE signal levels and height of the water level above the heated surface during the boiling process. The different types of heated fluid influence AE energy levels during the bubble formation process. Statistically, it was found that the best AE parameters to indicate bubble formation were AE-RMS, AE-Energy and AE-Amplitude.
引用
收藏
页码:191 / 201
页数:11
相关论文
共 42 条
[1]  
a Cengel Y., 2003, HEAT TRANSFER PRACTI, P785, DOI [10.1017/CBO9781107415324.004, DOI 10.1017/CBO9781107415324.004]
[2]  
Abe T, 1962, J OCEANOGR SOC JAP, V20, P242
[3]   Energy Index technique for detection of Acoustic Emissions associated with incipient bearing failures [J].
Al-Balushi, Khamis R. ;
Addali, A. ;
Charnley, B. ;
Mba, D. .
APPLIED ACOUSTICS, 2010, 71 (09) :812-821
[4]   The application of acoustic emission for detecting incipient cavitation and the best efficiency point of a 60 kW centrifugal pump: case study [J].
Alfayez, L ;
Mba, D ;
Dyson, G .
NDT & E INTERNATIONAL, 2005, 38 (05) :354-358
[5]  
Alfayez L, 2004, 26 EU BERLIN
[6]  
Alhashan T., 2016, Int. J. Eng. Res. Sci, V2, P66
[7]  
Alhashan T, 2017, INT J ENERGY ENV ENG
[8]  
Alhashan T., 2016, EFFECT SALT WATER BU, V13, P51, DOI [10.9790/1684-1305085156, DOI 10.9790/1684-1305085156]
[9]  
Alssayh M, 2014, P I MECH ENG E-J PRO, V230, P76
[10]  
Alssayh M, 2013, THESIS