Utilization of sarkanda for making pulp and paper using elemental chlorine free and total chlorine free bleaching processes

被引:17
|
作者
Sharma, Nirmal [1 ]
Tripathi, Sandeep Kumar [1 ]
Bhardwaj, Nishi Kant [1 ]
机构
[1] Avantha Ctr Ind Res & Dev, Paper Mill Campus, Yamunanagar 135001, Haryana, India
关键词
Sarkanda; Soda-anthraquinone pulping; Morphological properties; Physical properties; ECF and TCF bleaching; Adsorbable organic halides; WHEAT-STRAW PULP; RAW-MATERIALS; OZONE PRIOR; PAPERMAKING; CELLULOSE; GRASSES; BAGASSE; IMPACT; SODA;
D O I
10.1016/j.indcrop.2020.112316
中图分类号
S2 [农业工程];
学科分类号
0828 ;
摘要
A lignocellulosic non-wood material sarkanda available in abundance as waste, was evaluated for chemical constituents, pulping behavior, morphological properties, bleaching behavior and paper handsheet strength properties. Present study reveals that sarkanda contains cellulose 36.2 +/- 0.5 %, hemicelluloses 35.2 +/- 0.41 %, lignin 21.2 +/- 0.22 % and ash 8.2 +/- 0.3 %. Soda-anthraquinone pulping of sarkanda using 15 % active alkali resulted in unbleached pulp with 14.7 kappa number, 16.0 cP viscosity and 54.6 % pulp yield. With use of elemental chlorine free bleaching sequence, OD0EOPD, final bleached pulp achieved 85.7 % ISO brightness, whereas, using total chlorine free bleaching sequence, OZ(EOP)P(O)P(O), the brightness obtained was 81.9 % ISO. Elemental chlorine free bleached sarkanda pulp had tensile index of 39.4 N m/g, burst index of 3.4 kN/g and tear index of 5.7 mNm(2)/g. The study exhibits that sarkanda has potential to be utilized for papermaking. Such approach of using non-wood raw material with elemental chlorine free bleaching and total chlorine free bleaching sequences for papermaking can be a valuable approach for reducing pollutants generation, utilization of waste biomass and fulfillment of fibrous raw material requirement for paper industry.
引用
收藏
页数:8
相关论文
共 50 条
  • [41] Chlorine-free Bleaching of Eucalyptus Kraft Pulp Using a Mixture of Peroxymonosulfuric Acid and a Trace of Chlorine Dioxide
    Xu, Yinchao
    Huang, Rong
    Salaghi, Ayyoub
    Jin, Guangfan
    Nakagawa-Izumi, Akiko
    MOKUZAI GAKKAISHI, 2021, 67 (04): : 217 - 222
  • [42] Optimization of elemental chlorine-free bleaching for a softwood kraft pulp - part 1: impact of oxidative extraction on chlorine dioxide stoichiometry
    Brogdon, Brian N.
    TAPPI JOURNAL, 2010, 9 (08): : 27 - 35
  • [44] Influence of bleaching conditions on the reversal of whiteness of kraft pulp of eucalyptus globulus in elemental chlorine-free (ECF) bleaching
    Sêco, Isabel M. C. L.
    Neto, Carlos Pascoal
    Silvestre, Armando J. D.
    O Papel (Brazil), 2007, 68 (07): : 20 - 30
  • [45] ENVIRONMENTAL ASPECTS AND EFFICACY OF PERACETIC ACID TREATMENT TO IMPROVE ELEMENTAL CHLORINE FREE BLEACHING PROCESSES
    Sharma, Nirmal
    Bhardwaj, Nishi Kant
    Singh, Ram Bhushan Prashad
    CELLULOSE CHEMISTRY AND TECHNOLOGY, 2024, 58 (7-8): : 759 - 769
  • [46] Soda-AQ pulping and chlorine free bleaching of loblolly pine - Total system approach to sulfur free pulping and chlorine free bleaching of softwood
    Parthasarathy, VR
    1996 INTERNATIONAL ENVIRONMENTAL CONFERENCE BOOKS 1 AND 2: PARTNERS IN GLOBAL STEWARDSHIP, 1996, : 559 - 573
  • [47] Two mannanases from Sclerotium rolfsii in total chlorine free bleaching of softwood kraft pulp
    Institute of Biotechnology, SFB Biokatalyse, Graz University of Technicology, Petersgasse 121, A-8010 Graz, Austria
    J. BIOTECHNOL., 2-3 (181-188):
  • [48] Two mannanases from Sclerotium rolfsii in total chlorine free bleaching of softwood kraft pulp
    Gubitz, GM
    Schnitzhofer, W
    Balakrishnan, H
    Steiner, W
    JOURNAL OF BIOTECHNOLOGY, 1996, 50 (2-3) : 181 - 188
  • [49] ELEMENTAL CHLORINE-FREE BLEACHING OF SODA, KRAFT, AND SULPHITE PULPS
    Potucek, F.
    Rihova, M.
    PROCEEDINGS OF THE 6TH INTERNATIONAL CONFERENCE ON CHEMICAL TECHNOLOGY (ICCT), 2018, : 407 - 412
  • [50] Effect of totally chlorine free and elemental chlorine free sequences on whole stem kenaf (Hibiscus cannabinus) pulp characteristics
    Ashori, A
    Raverty, WD
    Harun, J
    POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 2006, 45 (02) : 205 - 211