Performance study of a wood solar drying device with latent heat storage system

被引：1
|
作者：
Feng, Xiaojiang [1 ]
He, Zhengbin [1 ]
Yi, Songlin [1 ]
机构：
[1] Beijing Forestry Univ, Coll Mat Sci & Technol, Beijing 100083, Peoples R China
来源：
MATERIALS SCIENCE AND ENGINEERING APPLICATIONS, PTS 1-3 | 2011年 / 160-162卷
关键词：
solar; latent heat storage; wood drying; performance; KILN;
D O I：
10.4028/www.scientific.net/AMR.160-162.1032
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Wood drying is one of the most important process links in wood products processing and it consumes roughly 40%similar to 70% of the total energy in the entire process. The performance of a mobile wood solar drying device with latent heat storage system was tested in this paper. The test results showed that the average power of collector system was 0.572kW and thermal efficiency was 56%, which was higher than that of the flat-plate collector. Energy storage efficiency came to 66% and energy storage density was 54.5 MJ/m(3). Compared with the steam drying, energy-saving effect of solar drying increased significantly. The energy saving rate was 71.2%. Additionally, the drying device could accurately control the temperature, so it could better accomplish various drying process.
引用
收藏
页码：1032 / 1037
页数：6
相关论文
共 50 条
  • [21] Simulation and performance of a solar air collector and a storage system for a drying unit
    Ayadi, M.
    Mabrouk, S. B.
    Zouari, I.
    Bellagi, A.
    SOLAR ENERGY, 2014, 107 : 292 - 304
  • [22] Thermal analysis of a solar concentrating system integrated with sensible and latent heat storage
    Bhale, Purnanand V.
    Rathod, Manish K.
    Sahoo, Laxmikant
    CLEAN, EFFICIENT AND AFFORDABLE ENERGY FOR A SUSTAINABLE FUTURE, 2015, 75 : 2157 - 2162
  • [23] Numerical heat transfer study of energy storage materials used in the latent heat storage system
    Anand A.
    Shukla A.
    Sharma A.
    Anand, Abhishek (pre17001@rgipt.ac.in), 1600, KeAi Communications Co. (03): : 633 - 639
  • [24] Influence of design on performance of a latent heat storage system at high temperatures
    Pirasaci, Tolga
    Wickramaratne, Chatura
    Moloney, Francesca
    Goswami, D. Yogi
    Stefartakos, Elias
    APPLIED ENERGY, 2018, 224 : 220 - 229
  • [25] Thermal Storage Technology on Solar Energy Wood Drying in China
    Zhang, Yanlai
    Liu, Chuanmei
    Luo, Lei
    Zhang, Hong
    Li, Lijun
    Zhang, Minglong
    FRONTIERS OF GREEN BUILDING, MATERIALS AND CIVIL ENGINEERING, PTS 1-8, 2011, 71-78 : 1191 - 1194
  • [26] Effect of regeneration heat and energy storage on thermal drying performance in a hardwood solar kiln
    Khouya, Ahmed
    RENEWABLE ENERGY, 2020, 155 : 783 - 799
  • [27] Review of Solar Cooking Using Latent Heat Storage
    Gore, Bhagwat
    Tandale, Madhukar
    DYNAMICS OF MACHINES AND MECHANISMS, INDUSTRIAL RESEARCH, 2014, 592-594 : 1761 - 1765
  • [28] Performance studies on a forced convection solar dryer integrated with a paraffin wax-based latent heat storage system
    Rabha, D. K.
    Muthukumar, P.
    SOLAR ENERGY, 2017, 149 : 214 - 226
  • [29] Parametric Study and Sensitivity Analysis of Latent Heat Thermal Energy Storage System in Concentrated Solar Power Plants
    Chirino, Hermes
    Xu, Ben
    JOURNAL OF SOLAR ENERGY ENGINEERING-TRANSACTIONS OF THE ASME, 2019, 141 (02):
  • [30] Optimization of latent heat storage in solar air heating system with vacuum tube air solar collector
    Arkar, Ciril
    Medved, Saso
    SOLAR ENERGY, 2015, 111 : 10 - 20
12345