Microstructure and microhardness of aluminium alloy friction stir welds with heat treatment

被引：26

作者：

Huang, Y. X. ^{[1
]}

Wan, L. ^{[1
]}

Lv, Z. L. ^{[1
]}

Lv, S. X. ^{[1
]}

Zhou, L. ^{[2
]}

Feng, J. C. ^{[1
,2
]}

机构：

[1] Harbin Inst Technol, State Key Lab Adv Welding & Joining, Harbin 150001, Peoples R China

[2] Harbin Inst Technol Weihai, Shandong Prov Key Lab Special Welding Technol, Weihai 264209, Peoples R China

来源：

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING | 2016年 / 21卷 / 08期

基金：

中国国家自然科学基金;

关键词：

Self-support friction stir welding; Post-weld heat treatment; Microstructure; Microhardness; Abnormal grain growth; ABNORMAL GRAIN-GROWTH; MECHANICAL-PROPERTIES; 6061-T6; ALUMINUM; PRECIPITATION SEQUENCE; TENSILE PROPERTIES; AL-ALLOY; JOINTS; RECRYSTALLIZATION; TOOL; SHOULDER;

D O I：

10.1080/13621718.2016.1152748

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In this study, the Al-Mg-Si aluminium alloy with a T6 temper is self-support friction stir welded, and the effect of post-weld heat treatment on joints is investigated by detailed microstructural investigations and microhardness measurements. The hardness decreases from average 59 to 52 HV with holding time ranging from 10 to 60 minutes at temperature 723 K. With increasing holding temperature, the microhardness becomes more uniform and increases. Microhardness profiles are explained by precipitate distributions and precipitation sequences. The fine grain structure undergoes abnormal grain growth, and the degree of which depends on holding temperature and intense plastic deformation, and the biggest size is more than 1 mm.

引用

页码：638 / 644

页数：7

共 33 条

[1] Friction stir welding parameters: a tool for controlling abnormal grain growth during subsequent heat treatment [J].

Attallah, MM ;

Salem, HG .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 391 (1-2) :51-59

[2] The effect of post-weld heat treatment on the mechanical properties of 2024-T4 friction stir-welded joints [J].

Aydin, Hakan ;

Bayram, Ali ;

Durgun, Ismail .

MATERIALS & DESIGN, 2010, 31 (05) :2568-2577

[3] Microstructural and mechanical characterization of electron beam welded Al-alloy 7020 [J].

Cam, G. ;

Kocak, M. .

JOURNAL OF MATERIALS SCIENCE, 2007, 42 (17) :7154-7161

[4] Temperature measurement and control of bobbin tool friction stir welding [J].

Chen, Shujin ;

Li, Hao ;

Lu, Sheng ;

Ni, Ruiyang ;

Dong, Jianghui .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016, 86 (1-4) :337-346

[5] Abnormal grain growth in Al-3.5Cu [J].

Dennis, J. ;

Bate, P. S. ;

Humphreys, F. J. .

ACTA MATERIALIA, 2009, 57 (15) :4539-4547

[6] The precipitation sequence in Al-Mg-Si alloys [J].

Edwards, GA ;

Stiller, K ;

Dunlop, GL ;

Couper, MJ .

ACTA MATERIALIA, 1998, 46 (11) :3893-3904

[7] Influences of post-weld heat treatment on tensile properties of friction stir-welded AA6061 aluminum alloy joints [J].

Elangovan, K. ;

Balasubramanian, V. .

MATERIALS CHARACTERIZATION, 2008, 59 (09) :1168-1177

[8] An experimental analysis and optimization of process parameter on friction stir welding of AA 6061-T6 aluminum alloy using RSM [J].

Elatharasan, G. ;

Kumar, V. S. Senthil .

INTERNATIONAL CONFERENCE ON DESIGN AND MANUFACTURING (ICONDM2013), 2013, 64 :1227-1234

[9] Recrystallization mechanisms in 5251 H14 and 5251 O aluminum friction stir welds [J].

Etter, A. L. ;

Baudin, T. ;

Fredj, N. ;

Penelle, R. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 445 :94-99

[10] A process model for friction stir welding of age hardening aluminum alloys [J].

Frigaard, O ;

Grong, O ;

Midling, OT .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2001, 32 (05) :1189-1200

← 1 2 3 4 →