Analysis and Design of a Multiport Converter Using a Magnetic Coupling Inductor Technique

被引:32
作者
Itoh, Kenichi [1 ]
Ishigaki, Masanori [1 ]
Yanagizawa, Naoki [1 ]
Tomura, Shuji [1 ]
Umeno, Takaji [1 ]
机构
[1] Toyota Cent Res & Dev Labs Inc, Elect Device Res Div, Nagakute, Aichi 4801192, Japan
关键词
Isolated bi-directional dc/dc converter; magnetic coupling inductor; multiport converter; DC-DC CONVERTER; ENERGY-STORAGE; PERFORMANCE;
D O I
10.1109/TIA.2014.2354401
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
A novel multiport dc-dc converter with a coupling magnetic inductor is analyzed and designed. The proposed circuit integrates two multiphase converters and one isolated dc-dc converter. These converters can be controlled independently in one circuit by adjusting the duty ratio and phase angle difference. There are four dc ports in the circuit, and the dc power can be delivered multidirectionally among the four dc ports. In this paper, a 1.5-kW prototype of the multiport converter was constructed and successfully operated under full power. The experimental results confirm the theoretical analysis, and the conversion efficiency is above 90% over a wide range of output power. In addition, an example of a multifunctional power conversion system using the multiport converter is demonstrated.
引用
收藏
页码:1713 / 1721
页数:9
相关论文
共 17 条
[1]   Energy storage and its use with intermittent renewable energy [J].
Barton, JP ;
Infield, DG .
IEEE TRANSACTIONS ON ENERGY CONVERSION, 2004, 19 (02) :441-448
[2]   A 3-PHASE SOFT-SWITCHED HIGH-POWER-DENSITY DC-DC CONVERTER FOR HIGH-POWER APPLICATIONS [J].
DEDONCKER, RWAA ;
DIVAN, DM ;
KHERALUWALA, MH .
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 1991, 27 (01) :63-73
[3]   A bi-directional DC/DC converter for an energy storage system [J].
Inoue, Shigenori ;
Akagi, Hirofumi .
APEC 2007: TWENTY-SECOND ANNUAL IEEE APPLIED POWER ELECTRONICS CONFERENCE AND EXPOSITION, VOLS 1 AND 2, 2007, :761-+
[4]  
Ishigaki M, 2013, APPL POWER ELECT CO, P1068, DOI 10.1109/APEC.2013.6520432
[5]  
Itoh K, 2013, IEEE ENER CONV, P4713, DOI 10.1109/ECCE.2013.6647333
[6]   Performance of a 25kW 700V Galvanically Isolated Bidirectional DC-DC Converter Using 1.2kV Silicon Carbide MOSFETs and Schottky Diodes [J].
Jain, Amit K. ;
McIntosh, David ;
Jones, Matt ;
Ratliff, Brian .
SILICON CARBIDE AND RELATED MATERIALS 2011, PTS 1 AND 2, 2012, 717-720 :1237-1240
[7]   Accurate Power Loss Model Derivation of a High-Current Dual Active Bridge Converter for an Automotive Application [J].
Krismer, Florian ;
Kolar, Johann W. .
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2010, 57 (03) :881-891
[8]  
Lee FC, 2013, APPL POWER ELECT CO, P679, DOI 10.1109/APEC.2013.6520283
[9]  
Morita T, 2011, APPL POWER ELECT CO, P481, DOI 10.1109/APEC.2011.5744640
[10]  
Qian ZJ, 2011, IEEE ENER CONV, P1454, DOI 10.1109/ECCE.2011.6063952