Research on molten pool temperature in the process of laser rapid forming

被引：114

作者：

Tan Hua ^{[1
]}

Chen Jing ^{[1
]}

Lin Xin ^{[1
]}

Zhang Fengying ^{[1
]}

Huang Weidong ^{[1
]}

机构：

[1] Northwestern Polytech Univ, State Key Lab Solidificat Proc, Xian 710072, Peoples R China

来源：

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | 2008年 / 198卷 / 1-3期

基金：

中国国家自然科学基金;

关键词：

laser rapid forming; molten pool temperature; laser cladding; temperature measure; cladding thickness;

D O I：

10.1016/j.jmatprotec.2007.06.090

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A temperature measurement system has been developed by using a two-color infrared thermometer. The real-time tracking and fixed-point measurement were achieved during the LRF process. The influences of laser processing parameters on the temperature of molten pool was investigated, such as powder feed rate, scanning velocity of laser beam, laser power, spot diameter, shielding gas flow rate and powder feeding position. The control scheme of the single layer thickness was discussed and the relationship between the molten pool temperature and the cladding thickness was build. (c) 2007 Elsevier B.V. All rights reserved.

引用

页码：454 / 462

页数：9

共 9 条

[1] Understanding thermal behavior in the LENS process [J].

Griffith, ML ;

Schlienger, ME ;

Harwell, LD ;

Oliver, MS ;

Baldwin, MD ;

Ensz, MT ;

Essien, M ;

Brooks, J ;

Robino, CV ;

Smugeresky, JE ;

Hofmeister, WH ;

Wert, MJ ;

Nelson, DV .

MATERIALS & DESIGN, 1999, 20 (2-3) :107-113

[2] Modeling of laser cladding with powder injection [J].

Han, L ;

Liou, FW ;

Phatak, KM .

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2004, 35 (06) :1139-1150

[3] Optical focus control system for laser welding and direct casting [J].

Hand, DP ;

Fox, MDT ;

Haran, FM ;

Peters, C ;

Morgan, SA ;

McLean, MA ;

Steen, WM ;

Jones, JDC .

OPTICS AND LASERS IN ENGINEERING, 2000, 34 (4-6) :415-427

[4] Improving solid freeform fabrication by laser-based additive manufacturing [J].

Hu, D ;

Mei, H ;

Kovacevic, R .

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2002, 216 (09) :1253-1264

[5] Sensing, modeling and control for laser-based additive manufacturing [J].

Hu, DM ;

Kovacevic, R .

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2003, 43 (01) :51-60

[6] Temperature distribution in laser-clad multi-layers [J].

Jendrzejewski, R ;

Kreja, I ;

Sliwinski, G .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 379 (1-2) :313-320

[7]

Keicher D. M., 1997, SPIE, V2993, P91

[8] An in-process method for the estimation of the powder catchment efficiency during laser cladding [J].

Lin, J ;

Steen, WM .

OPTICS AND LASER TECHNOLOGY, 1998, 30 (02) :77-84

[9] Near net shape manufacturing of components using direct laser fabrication technology [J].

Wu, X ;

Mei, J .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2003, 135 (2-3) :266-270

← 1 →