Lubricant applying effect in aluminum cutting

被引：0
作者：
Kaneeda, T [1 ]
Taki, T [1 ]
机构：
[1] Okayama Univ Sci, Okayama 7000005, Japan
来源：
PROGRESS OF MACHINING TECHNOLOGY: WITH SOME TOPICS IN ADVANCED MANUFACTURING TECHNOLOGY | 2000年
关键词：
lubricant applying effect; applied material; Rebinder effect; boundary lubrication; work hardening layer; pre-cut surface; bulging; dead layer; pure aluminum; depth of cut; cutting speed;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper deals with the detailed mechanism of lubricant applying effect. The influence of die depth of cut and cutting speeds on lubricant applying effect were also analyzed. The experimental results indicated that the Vickers microhardness distribution in the zone to be cut markedly controlled reduction percentage in the cutting force. It is concluded that the lubricant applied to the pre-cut surface reduces friction at the microcrack openings on the pre-cut surface, which results in smaller shear deformation under high normal stress at the shear plane.
引用
收藏
页码：185 / 190
页数：6
相关论文
共 50 条
[31]   Effect of lubricant quantity and surface topography on the frictional behaviour of can body stock [J].
Chvedov, D ;
Jones, R ;
Rosenfeld, A .
TRIBOLOGY TRANSACTIONS, 2003, 46 (03) :339-347
[32]   THE EFFECT OF THE CUTTING SPEED ON THE CUTTING FORCES AND SURFACE FINISH WHEN MILLING CHROMIUM 210 Cr12 STEEL HARDFACINGS WITH UNCOATED CUTTING TOOLS [J].
Altin, Abdullah .
MATERIALI IN TEHNOLOGIJE, 2014, 48 (03) :373-378
[33]   Electrochemical treatment of a graphitic forging lubricant effluent: The effect of chloride concentration and current density [J].
Borsa, Maria Beatriz ;
Jungblut, Ricardo ;
Perez-Herranz, Valentin ;
Mueller, Iduvirges Lourdes ;
Bernardes, Andrea Moura ;
Bergmann, Carlos Perez .
SEPARATION SCIENCE AND TECHNOLOGY, 2016, 51 (01) :126-134
[34]   Friction and Lubrication of Eye/Lens/Lid Interface: The Effect of Lubricant and Contact Lens Material [J].
Necas, David ;
Kulisek, Vlastimil ;
Stepan, Petr ;
Ondreas, Frantisek ;
Cipek, Pavel ;
Huerta-Angeles, Gloria ;
Vrbka, Martin .
TRIBOLOGY LETTERS, 2023, 71 (04)
[35]   Effect of cutting conditions on surface roughness of machined parts in CO2 laser cutting of pure titanium [J].
Boujelbene, M. ;
El Aoud, B. ;
Bayraktar, E. ;
Elbadawi, I ;
Chaudhry, I ;
Khaliq, A. ;
Ayyaz, A. ;
Elleuch, Z. .
MATERIALS TODAY-PROCEEDINGS, 2021, 44 :2080-2086
[36]   Investigations into the effect of cutting speed on nano-cutting of metallic glass by using molecular dynamics simulation analysis [J].
Liu, Yin ;
Cui, Xiaoqing ;
Sun, Xingwei ;
Yang, Heran ;
Dong, Zhixu ;
Gong, Yadong ;
Yuan, Zewei ;
Pan, Fei ;
Zhao, Hongxun ;
Liu, Weijun .
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2023, 127 (11-12) :5253-5263
[37]   Investigations into the effect of cutting speed on nano-cutting of metallic glass by using molecular dynamics simulation analysis [J].
Yin Liu ;
Xiaoqing Cui ;
Xingwei Sun ;
Heran Yang ;
Zhixu Dong ;
Yadong Gong ;
Zewei Yuan ;
Fei Pan ;
Hongxun Zhao ;
Weijun Liu .
The International Journal of Advanced Manufacturing Technology, 2023, 127 :5253-5263
[38]   Effect of feed rate and cutting speed on cutting forces developed during machining of epoxy based almond shell (Prunus amygdalus L.) - Coconut fiber (Cocos nucifera) particle reinforced biocomposites [J].
Chaudhary, Arun Kumar ;
Gope, P. C. ;
Mandal, Anand Kumar ;
Jain, Vandana ;
Patidar, Arvind .
MATERIALS TODAY-PROCEEDINGS, 2021, 44 :1903-1905
[39]   Effect of oxygen on aluminum corrosion in pure water [J].
Ishii, Katsuya ;
Ozaki, Ryota ;
Kaneko, Kenji ;
Masuda, Masataka .
JOURNAL OF THE JAPAN INSTITUTE OF METALS, 2006, 70 (10) :845-848
[40]   Effect of Cardamom Extract on leaching of Aluminum Cookware [J].
Al Juhaiman, Layla A. ;
Al-Shihry, Raesa A. ;
Al-Hazimi, Hassan M. .
INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, 2014, 9 (03) :1055-1070
12345