Lubricant applying effect in aluminum cutting

被引：0

作者：

Kaneeda, T ^{[1
]}

Taki, T ^{[1
]}

机构：

[1] Okayama Univ Sci, Okayama 7000005, Japan

来源：

PROGRESS OF MACHINING TECHNOLOGY: WITH SOME TOPICS IN ADVANCED MANUFACTURING TECHNOLOGY | 2000年

关键词：

lubricant applying effect; applied material; Rebinder effect; boundary lubrication; work hardening layer; pre-cut surface; bulging; dead layer; pure aluminum; depth of cut; cutting speed;

D O I：

暂无

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper deals with the detailed mechanism of lubricant applying effect. The influence of die depth of cut and cutting speeds on lubricant applying effect were also analyzed. The experimental results indicated that the Vickers microhardness distribution in the zone to be cut markedly controlled reduction percentage in the cutting force. It is concluded that the lubricant applied to the pre-cut surface reduces friction at the microcrack openings on the pre-cut surface, which results in smaller shear deformation under high normal stress at the shear plane.

引用

收藏

页码：185 / 190

页数：6

相关论文

共 50 条

[21] Effect of cutting parameters on surface roughness in turning of annealed AISI-1020 steel [J].

Zurita, Omar ;

Di-Graci, Veronica ;

Capace, Maria .

REVISTA FACULTAD DE INGENIERIA, UNIVERSIDAD PEDAGOGICA Y TECNOLOGICA DE COLOMBIA, 2018, 27 (47) :111-118

[22] Fundamental research on hobbing with minimal quantity lubrication of cutting oil - (Effect of cutting speed) [J].

Matsuoka, Hironori ;

Tsuda, Yoshihiro ;

Suda, Satoshi ;

Yokota, Hideo .

JSME INTERNATIONAL JOURNAL SERIES C-MECHANICAL SYSTEMS MACHINE ELEMENTS AND MANUFACTURING, 2006, 49 (04) :1140-1150

[23] Forecasting Cutting Force by Using Artificial Neural Networks Based on Experiments of Turning Aluminum [J].

Mahjoob, Dawood S. ;

Khalaf, Ahmad A. ;

Hanon, Muammel M. .

INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND ROBOTICS RESEARCH, 2023, 12 (06) :410-416

[24] Effect of machining parameters in ultrasonic vibration cutting [J].

Nath, Chandra ;

Rahman, M. .

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2008, 48 (09) :965-974

[25] Effect of cutting speed on surface quality by bandsawing [J].

Yu Jianguo ;

Liangkai Ting .

Journal of Forestry Research, 1997, 8 (4) :246-249

[26] The Effect of Cutting Speed in Metallic Glass Grinding [J].

Serbest, Erdinc ;

Bakkal, Mustafa ;

Karipcin, Ilker ;

Derin, Bora .

INTERNATIONAL CONFERENCE ON ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, PTS ONE AND TWO, 2010, 1315 :967-+

[27] The Effect of the Cutting Speed on the Machined Surface Roughness [J].

Gutakovskis, V. ;

Bunga, G. ;

Pikurs, G. ;

Ratkus, A. ;

Brutans, V. .

MECHANIKA 2012: PROCEEDINGS OF THE 17TH INTERNATIONAL CONFERENCE, 2012, :66-72

[28] The Effect of Cutting Speed and Depth of Cut on Surface Roughness During Machining of Austempered Ductile Iron [J].

Parhad, Prashant ;

Likhite, Ajay ;

Bhatt, Jatin ;

Peshwe, Dilip .

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2015, 68 (01) :99-108

[29] The Effect of Cutting Speed and Depth of Cut on Surface Roughness During Machining of Austempered Ductile Iron [J].

Prashant Parhad ;

Ajay Likhite ;

Jatin Bhatt ;

Dilip Peshwe .

Transactions of the Indian Institute of Metals, 2015, 68 :99-108

[30] Investigation of the effect of cutting speed and vibration amplitude on cutting forces in ultrasonic-assisted milling [J].

Zarchi, Mohammad M. Abootorabi ;

Razfar, Mohammad R. ;

Abdullah, Amir .

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2012, 226 (B7) :1185-1191

← 1 2 3 4 5 →