Torque ripple optimization for synchronous reluctance motors based on a virtual permanent magnet harmonic machine model

被引:0
作者
Xu, Yixiang [1 ]
Di, Chong [1 ]
Bao, Xiaohua [1 ,2 ]
Xu, Dongying [1 ]
机构
[1] Hefei Univ Technol, Sch Elect Engn & Automat, Hefei, Anhui, Peoples R China
[2] Hefei Univ Technol, Intelligent Mfg Inst, Hefei 230009, Peoples R China
关键词
Synchronous reluctance motors; torque ripple; virtual permanent magnet harmonic machine; DESIGN;
D O I
10.3233/JAE-210068
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
The torque ripple is affected by both the stator and the rotor magnetic field harmonics. In synchronous reluctance motors (SynRM), there are only rotor permeance harmonics existing on the rotor side for the absence of the rotor windings. Since the asymmetric rotor flux barriers are widely applied in the SynRM rotor, it is difficult to calculate the rotor permeance accurately by the analytical method. In this article, the effects of the rotor permeance harmonics on the air-gap magnetic field are studied by a virtual permanent magnet harmonic machine (VPMHM), which is a finite-element (FE) based magnetostatic analysis model. The air-gap flux density harmonics produced by the SynRM rotor are extracted from the VPMHM model and used as the intermediate variables for the torque ripple optimization. The proposed method does not need to solve the transient process of motor motion. Hence, the time of the optimization process can be significantly shortened. Finally, a full electric cycle is simulated by dynamic FE simulation, and the torque ripple is proved to be effectively reduced.
引用
收藏
页码:327 / 338
页数:12
相关论文
共 50 条
  • [31] Novel Rotor Design Optimization of Synchronous Reluctance Machine for Low Torque Ripple
    Moghaddam, Reza-Rajabi
    Magnussen, Freddy
    Sadarangani, Chandur
    2012 XXTH INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES (ICEM), 2012, : 720 - 724
  • [32] Simple Design Approach for Low Torque Ripple and High Output Torque Synchronous Reluctance Motors
    Ibrahim, Mohamed Nabil Fathy
    Sergeant, Peter
    Rashad, Essam
    ENERGIES, 2016, 9 (11)
  • [33] Analytical Model for the Minimization of Torque Ripple in Permanent Magnets Assisted Synchronous Reluctance Motors Through Asymmetric Rotor Poles
    Pina, Alejandro J.
    Cai, Haiwei
    Alsmadi, Yazan
    Xu, Longya
    2015 IEEE ENERGY CONVERSION CONGRESS AND EXPOSITION (ECCE), 2015, : 5609 - 5615
  • [34] Extended DQ Model of a Permanent Magnet Synchronous Machine by Including Magnetic Saturation and Torque Ripple Effects
    Zarate, Sergio
    Almandoz, Gaizka
    Ugalde, Gaizka
    Poza, Javier
    Escalada, Ana Julia
    2017 IEEE INTERNATIONAL WORKSHOP OF ELECTRONICS, CONTROL, MEASUREMENT, SIGNALS AND THEIR APPLICATION TO MECHATRONICS (ECMSM), 2017,
  • [35] Asymmetric Rotor Surface Design in Interior Permanent Magnet Synchronous Motors for Torque Ripple Mitigation
    Liang, Jingchen
    Parsapour, Amir
    Moallem, Mehdi
    Fahimi, Babak
    2019 IEEE INTERNATIONAL ELECTRIC MACHINES & DRIVES CONFERENCE (IEMDC), 2019, : 727 - 732
  • [36] Comparison of Permanent Magnet Synchronous Motor and Synchronous Reluctance Motor Based on Their Torque per Unit Volume
    Lavrinovicha, Ludmila
    Dirba, Janis
    2014 9TH INTERNATIONAL ELECTRIC POWER QUALITY AND SUPPLY RELIABILITY CONFERENCE (PQ 2014), 2014, : 233 - 236
  • [37] Implementing Iterative Learning Control to Reduce Torque Ripple of Permanent Magnet Synchronous Machine
    Huang, Zhao
    Cheng, Hanxiang
    ADVANCED MEASUREMENT AND TEST, PTS 1-3, 2011, 301-303 : 1676 - 1681
  • [38] Optimization design and torque performance research of interior permanent magnet synchronous motors
    Niu, Lianbo
    SCIENTIFIC REPORTS, 2025, 15 (01):
  • [39] Factor Analysis of Torque Ripple Reduction in Synchronous Reluctance Motors Derived from Topology Optimization
    Kaimori, Hiroyuki
    Okamoto, Yoshifumi
    Wakao, Shinji
    IEEJ JOURNAL OF INDUSTRY APPLICATIONS, 2019, 8 (06) : 1007 - 1014
  • [40] Factor analysis of torque ripple reduction in synchronous reluctance motors derived from topology optimization
    Kaimori H.
    Okamoto Y.
    Wakao S.
    IEEJ Transactions on Industry Applications, 2019, 139 (04): : 380 - 387