Shear resistance of RC circular members with FRP discrete hoops versus spirals

被引：23

作者：

Ali, Ahmed H. ^{[1
,3
]}

Mohamed, Hamdy M. ^{[2
,3
]}

Chaallal, Omar ^{[1
]}

Benmokrane, Brahim ^{[2
]}

Ghrib, Faouzi ^{[4
]}

机构：

[1] Ecole Technol Super, Dept Construct Engn, Montreal, PQ, Canada

[2] Univ Sherbrooke, Dept Civil Engn, Quebec City, PQ, Canada

[3] Helwan Univ, Dept Civil Engn, Cairo, Egypt

[4] Univ Windsor, Dept Civil & Environm Engn, Windsor, ON, Canada

来源：

ENGINEERING STRUCTURES | 2018年 / 174卷

关键词：

Composite; FRP; Circular; Hoops; Spirals; Concrete; Shear; Code; Design; CONCRETE BEAMS; STRENGTH; DURABILITY; MODEL;

D O I：

10.1016/j.engstruct.2018.07.060

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

Nowadays, design guidelines and codes contain valuable shear provisions for the design of concrete bridge members reinforced with fiber-reinforced-polymer (FRP) bars. Limited researches seem to have assessed the shear strength of circular concrete members reinforced with FRP reinforcement. Therefore, these standards do not provide specific formulae for circular RC members designed with FRP bars, hoops and spirals under shear loads. This paper reports experimental data about the shear strength of circular concrete specimens reinforced with FRP bars, discrete hoops and continuous spirals. Full-scale circular concrete specimens with a total length of 3,000 mm and 508 mm in diameter were constructed and tested up to failure. The test parameters included the type of reinforcement (glass FRP and carbon FRP versus steel) and configuration of the shear reinforcement (discrete hoops versus continuous spirals). The investigation revealed that the specimen reinforced with FRP hoops exhibited high load-carrying capacity comparable to the counterpart reinforced with FRP spirals. The experimental shear strengths of the FRP-reinforced concrete specimens were compared to theoretical predictions provided by current codes, design guidelines. The results of this study can be used as a fundamental step toward code provisions for using CFRP or CFRP spirals and hoops as internal shear reinforcement.

引用

页码：688 / 700

页数：13

共 38 条

[11] Laboratory assessment and durability performance of vinyl-ester, polyester, and epoxy glass-FRP bars for concrete structures [J].

Benmokrane, Brahim ;

Ali, Ahmed H. ;

Mohamed, Hamdy M. ;

ElSafty, Adel ;

Manalo, Allan .

COMPOSITES PART B-ENGINEERING, 2017, 114 :163-174

[12] Durability Assessment of Glass FRP Solid and Hollow Bars (Rock Bolts) for Application in Ground Control of Jurong Rock Caverns in Singapore [J].

Benmokrane, Brahim ;

Robert, Mathieu ;

Mohamed, Hamdy M. ;

Ali, Ahmed H. ;

Cousin, Patrice .

JOURNAL OF COMPOSITES FOR CONSTRUCTION, 2017, 21 (03)

[13] Proposal of a complete seismic shear strength model for circular concrete columns [J].

Cai, Gaochuang ;

Sun, Yuping ;

Takeuchi, Takashi ;

Zhang, Jianwei .

ENGINEERING STRUCTURES, 2015, 100 :399-409

[14] Full-scale seismic testing of concrete building columns reinforced with both steel and CFRP bars [J].

Cai, Zhong-Kui ;

Wang, Daiyu ;

Wang, Zhenyu .

COMPOSITE STRUCTURES, 2017, 178 :195-209

[15]

Canadian Standards Association (CSA), 2012, CANCSAS80612

[16] A mechanical model for failures in shear of members without transverse reinforcement based on development of a critical shear crack [J].

Cavagnis, Francesco ;

Ruiz, Miguel Fernandez ;

Muttoni, Aurelio .

ENGINEERING STRUCTURES, 2018, 157 :300-315

[17]

Clarke JL, 1993, ACI STRUCT J, V71, P81

[18] Evaluation of the new Canadian highway bridge design code shear provisions for concrete beams with fiber-reinforced polymer reinforcement [J].

El-Sayed, Ahmed K. ;

Benmokrane, Brahim .

CANADIAN JOURNAL OF CIVIL ENGINEERING, 2008, 35 (06) :609-623

[19]

Feltham I., 2004, J STRUCTURAL ENG ASC, V84, P27

[20] Discussion of "Theoretical shear strength of concrete columns due to transverse steel" by Jang Hoon Kim and John B. Mander [J].

Feltham, Ian .

JOURNAL OF STRUCTURAL ENGINEERING, 2006, 132 (07) :1178-1178

← 1 2 3 4 →