Shear resistance of RC circular members with FRP discrete hoops versus spirals

被引：23

作者：

Ali, Ahmed H. ^{[1
,3
]}

Mohamed, Hamdy M. ^{[2
,3
]}

Chaallal, Omar ^{[1
]}

Benmokrane, Brahim ^{[2
]}

Ghrib, Faouzi ^{[4
]}

机构：

[1] Ecole Technol Super, Dept Construct Engn, Montreal, PQ, Canada

[2] Univ Sherbrooke, Dept Civil Engn, Quebec City, PQ, Canada

[3] Helwan Univ, Dept Civil Engn, Cairo, Egypt

[4] Univ Windsor, Dept Civil & Environm Engn, Windsor, ON, Canada

来源：

ENGINEERING STRUCTURES | 2018年 / 174卷

关键词：

Composite; FRP; Circular; Hoops; Spirals; Concrete; Shear; Code; Design; CONCRETE BEAMS; STRENGTH; DURABILITY; MODEL;

D O I：

10.1016/j.engstruct.2018.07.060

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

Nowadays, design guidelines and codes contain valuable shear provisions for the design of concrete bridge members reinforced with fiber-reinforced-polymer (FRP) bars. Limited researches seem to have assessed the shear strength of circular concrete members reinforced with FRP reinforcement. Therefore, these standards do not provide specific formulae for circular RC members designed with FRP bars, hoops and spirals under shear loads. This paper reports experimental data about the shear strength of circular concrete specimens reinforced with FRP bars, discrete hoops and continuous spirals. Full-scale circular concrete specimens with a total length of 3,000 mm and 508 mm in diameter were constructed and tested up to failure. The test parameters included the type of reinforcement (glass FRP and carbon FRP versus steel) and configuration of the shear reinforcement (discrete hoops versus continuous spirals). The investigation revealed that the specimen reinforced with FRP hoops exhibited high load-carrying capacity comparable to the counterpart reinforced with FRP spirals. The experimental shear strengths of the FRP-reinforced concrete specimens were compared to theoretical predictions provided by current codes, design guidelines. The results of this study can be used as a fundamental step toward code provisions for using CFRP or CFRP spirals and hoops as internal shear reinforcement.

引用

页码：688 / 700

页数：13

共 38 条

[1]

ACI (American Concrete Institute), 2015, 4401R15 ACI

[2]

ACI (American Concrete Institute) Committee 318, 2014, 318 ACI COMM

[3]

Ali AH, 2016, J STRUCT ENG, DOI [10.1061/(ASCE)ST.1943-541X.0001684, 04016196, DOI 10.1061/(ASCE)ST.1943-541X.0001684,04016196]

[4] Statistical analysis and theoretical predictions of the tensile-strength retention of glass fiber-reinforced polymer bars based on resin type [J].

Ali, Ahmed H. ;

Benmokrane, Brahim ;

Mohamed, Hamdy M. ;

Manalo, Allan ;

El-Safty, Adel .

JOURNAL OF COMPOSITE MATERIALS, 2018, 52 (21) :2929-2948

[5] Shear Behavior of Circular Concrete Members Reinforced with GFRP Bars and Spirals at Shear Span-to-Depth Ratios between 1.5 and 3.0 [J].

Ali, Ahmed H. ;

Mohamed, Hamdy M. ;

Benmokrane, Brahim .

JOURNAL OF COMPOSITES FOR CONSTRUCTION, 2016, 20 (06)

[6]

[Anonymous], 2018, A615A615M18E1 ASTM

[7]

[Anonymous], 2014, Canadian Highway Bridge Design Code

[8]

[Anonymous], 2014, LRFD BRIDG DES SPEC, V7th

[9]

[Anonymous], 2009, AASHTO LRFD BRIDG DE, V4th

[10] Service-life-prediction and field application of glass fiber-reinforced polymer tubular and solid bolts based on laboratory physical and mechanical assessment [J].

Benmokrane, Brahim ;

Mohamed, Hamdy M. ;

Ali, Ahmed H. .

JOURNAL OF COMPOSITE MATERIALS, 2018, 52 (24) :3309-3323

← 1 2 3 4 →