Realtime 3D stress measurement in curing epoxy packaging

被引：0
|
作者：
Richter, J. [1 ]
Hyldgard, A. [1 ]
Birkelund, K. [1 ]
Hansen, O. [1 ]
Thomsen, E. V. [1 ]
机构：
[1] Tech Univ Denmark, Dept Micro & Nanotechnol, DK-2800 Lyngby, Denmark
来源：
TRANSDUCERS '07 & EUROSENSORS XXI, DIGEST OF TECHNICAL PAPERS, VOLS 1 AND 2 | 2007年
关键词：
stress sensor; epoxy; packaging;
D O I：
暂无
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
This paper presents a novel method to characterize stress in microsystern packaging. A circular p-type piezoresistor is implemented on a (001) silicon chip. We use the circular stress sensor to determine the packaging induced stress in a polystyrene tube filled with epoxy The epoxy curing process is monitored by stress measurements. From the stress measurements we conclude that the epoxy cures in 8 hours at room temperature. We find the difference in in-plane normal stresses to be sigma(xx)-sigma(yy)=6.7 MPa and (sigma(xx)+sigma(yy)-0.4 sigma(zz))=232 MPa.
引用
收藏
页数：2
相关论文
共 50 条
  • [1] Low-stress 3D packaging of a microsystem
    Morrissey, A.
    Kelly, G.
    Alderman, J.
    Sensors and Actuators, A: Physical, 1998, 68 (1 -3 pt 2): : 404 - 409
  • [2] Low-stress 3D packaging of a microsystem
    Morrissey, A
    Kelly, G
    Alderman, J
    SENSORS AND ACTUATORS A-PHYSICAL, 1998, 68 (1-3) : 404 - 409
  • [3] Analytical Stress Modeling for TSVs in 3D Packaging
    Suhir, Ephraim
    2015 31ST ANNUAL SEMICONDUCTOR THERMAL MEASUREMENT, MODELING & MANAGEMENT SYMPOSIUM (SEMI-THERM), 2015, : 99 - 106
  • [4] Stress monitoring in epoxy resins and embedded components during packaging and curing processes
    Schreier-Alt, Thomas
    Badstuebner, Kathrin
    Rebholz, Christian
    Ansorge, Frank
    Reichl, Herbert
    6TH INTERNATIONAL IEEE CONFERENCE ON POLYMERS AND ADHESIVES IN MICROELECTRONICS AND PHOTONICS, PROCEEDINGS 2007, 2007, : 265 - +
  • [5] Realtime Authentication using 3D Password
    Chakraborty, Supriya
    Kundu, Rahul
    Paramanik, Saikat
    Kumari, Annu
    Mukherjee, Ushoshee
    2022 IEEE INTERNATIONAL POWER AND RENEWABLE ENERGY CONFERENCE, IPRECON, 2022,
  • [6] Minimizim CD measurement bias through realtime acquisition of 3D feature shapes
    Foucher, Johann
    Gorelikov, Dmitry
    Poulingue, Marc
    Fabre, Pascal
    Sundaram, Ganesh
    METROLOGY, INSPECTION, AND PROCESS CONTROL FOR MICROLITHOGRAPHY XX, PTS 1 AND 2, 2006, 6152
  • [7] Microsystem packaging in 3D
    Kelly, G
    Alderman, J
    Lyden, C
    Barrett, J
    Morrissey, A
    MICROMACHINED DEVICES AND COMPONENTS III, 1997, 3224 : 142 - 152
  • [8] Lamination of dry film epoxy molding compounds for 3D packaging: advances and challenges
    Argoud, Maxime
    Eleouet, Raphael
    Dechamp, Jerome
    Allouti, Nacima
    Pain, Laurent
    Tiron, Raluca
    Mori, Daisuke
    Asahara, Masahiro
    Oi, Yosuke
    Kan, Katsushi
    IEEE 71ST ELECTRONIC COMPONENTS AND TECHNOLOGY CONFERENCE (ECTC 2021), 2021, : 2043 - 2048
  • [9] The future of 3D packaging
    Val, CM
    2ND 1998 IEMT/IMC SYMPOSIUM, 1998, : 261 - 271
  • [10] Thermo-mechanical Stress of Underfilled 3D IC Packaging
    Wang, Ming-Han
    Wu, Mei-Ling
    2014 15TH INTERNATIONAL CONFERENCE ON THERMAL, MECHANICAL AND MULTI-PHYSICS SIMULATION AND EXPERIMENTS IN MICROELECTRONICS AND MICROSYSTEMS (EUROSIME), 2014,
12345