One-step preparation of TaIr3-based material and its ablation performance under extreme environmental conditions

被引:17
作者
Baklanova, Natalya I. [1 ]
Lozanov, Victor V. [1 ]
Titov, Anatoly T. [2 ]
机构
[1] RAS, Inst Solid State Chem & Mechanochem SB, Kutateladze St 18, Novosibirsk 630128, Russia
[2] RAS, VS Sobolev Inst Geol & Mineral SB, Koptyug Ave 3, Novosibirsk 630090, Russia
基金
俄罗斯科学基金会;
关键词
Intermetallics; Tantalum oxide; SEM; X-ray diffraction; High temperature corrosion; Oxidation; OXIDATION BEHAVIOR; MECHANICAL-PROPERTIES; PLATINUM; CARBIDES; IRIDIUM; PHASE; MICROSTRUCTURE; INTERMETALLICS; ALLOYS;
D O I
10.1016/j.corsci.2018.08.044
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The solid-state interaction of TaC with Ir within the 1000-1600 degrees C temperature range leads to the formation of TaIr3 intermetallics. The durability of the TaIr3-based system with a silicon additive was studied under extreme environmental conditions. The TaIr3-based material displays satisfactory ablation resistance at 2000 degrees C in air in arc-jet. The post-test microstructural and XRD analysis of the developed material allowed us to propose the role of different constituents of the Ta - C - Ir - Si system. The iridium-containing phases play the most significant role in favorable ablation behavior of the developed system.
引用
收藏
页码:337 / 346
页数:10
相关论文
共 42 条
[1]   CATALYTIC-OXIDATION OF GRAPHITE BY IRIDIUM AND RHODIUM [J].
BAKER, RTK ;
SHERWOOD, RD .
JOURNAL OF CATALYSIS, 1980, 61 (02) :378-389
[2]   Microstructure and oxidation behaviour of Ir-rich Ir-Al binary alloys [J].
Bao, Z. B. ;
Murakami, H. ;
Yamabe-Mitarai, Y. .
CORROSION SCIENCE, 2014, 87 :306-311
[3]   THE FORMATION OF PATTERNS IN NONEQUILIBRIUM GROWTH [J].
BENJACOB, E ;
GARIK, P .
NATURE, 1990, 343 (6258) :523-530
[4]  
Chase M.W, 1998, J. Phys. Chem. Ref. Data, V9, P1, DOI 10.18434/T42S31
[5]   A FUNDAMENTAL PARAMETERS APPROACH TO X-RAY LINE-PROFILE FITTING [J].
CHEARY, RW ;
COELHO, A .
JOURNAL OF APPLIED CRYSTALLOGRAPHY, 1992, 25 (pt 2) :109-121
[6]  
Chen Z., 1997, APPL SURF SCI, V17, P1325
[7]  
Criscione J. M., 1964, MLTDR64173 AIR FOR 2, P156
[8]  
Criscione J. M., 1964, NASACR74187 UN CARB, P45
[9]   Comparison of the oxidation behaviour of two dense hot isostatically pressed tantalum carbide (TaC and Ta2C) materials [J].
DesmaisonBrut, M ;
Alexandre, N ;
Desmaison, J .
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 1997, 17 (11) :1325-1334
[10]  
FERGUSON WH, 1963, T METALL SOC AIME, V227, P1401