The influence of non-plastic fines on pore water pressure generation and undrained shear strength of sand-silt mixtures

被引:62
作者
Porcino, Daniela D. [1 ]
Diano, Valentina [1 ]
机构
[1] Univ Mediterranea Reggio Calabria, Dept DICEAM, Via Graziella Feo Vito, I-89060 Reggio Di Calabria, Italy
关键词
Sand; Non-plastic fines; Pore water pressure; Equivalent granular void ratio; Undrained cyclic simple shear strength; VOID RATIO; LIQUEFACTION RESISTANCE; TRANSITIONAL FINES; STATE PARAMETERS; PLASTIC FINES; SOILS; BEHAVIOR;
D O I
10.1016/j.soildyn.2017.07.015
中图分类号
P5 [地质学];
学科分类号
0709 ; 081803 ;
摘要
An extensive experimental study was undertaken to investigate the influence of non-plastic fines on pore water pressure generation and undrained cyclic shear strength of sand silt mixtures. For this,purpose, stress-controlled undrained cyclic simple shear (CSS) tests were carried out on reconstituted specimens of Ticino silica sand under different combinations of fines content (FC) and global void ratios (e). The applicability of several models suggested in literature for predicting cyclic residual excess pore water pressure generation in non-plastic silty soils was analyzed, and revised correlations for assessing model parameters were proposed. Finally, the study confirmed that the equivalent granular void ratio (e*) is an effective and appropriate parameter for characterizing the behavior of sand with fines up to a threshold value of fines content of sand-silt mixtures, and cyclic resistance ratio (CRR) of the mixtures can be well correlated with e*, irrespective of their fines contents and void ratios.
引用
收藏
页码:311 / 321
页数:11
相关论文
共 43 条
[21]   Experimental Investigation on Undrained Shear Behavior of Overconsolidated Sand-Silt Mixtures: Effect of Sample Reconstitution [J].
Mahmoudi, Y. ;
Taiba, A. Cherif ;
Belkhatir, M. ;
Schanz, T. .
GEOTECHNICAL TESTING JOURNAL, 2016, 39 (03) :515-523
[22]   Prediction of Excess Pore Water Pressure Generation in Sand-Silt Mixtures During Cyclic Loading: A Dissipated Energy-Based Model [J].
Baziar, Mohammad Hassan ;
Lashkajani, Mohammad Hossein Mollahassani .
GEOTECHNICAL AND GEOLOGICAL ENGINEERING, 2024, 42 (06) :5209-5228
[23]   Effect of Gradation and Non-plastic Fines on Monotonic and Cyclic Simple Shear Strength of Silica Sand [J].
Doygun, O. ;
Brandes, H. G. ;
Roy, T. T. .
GEOTECHNICAL AND GEOLOGICAL ENGINEERING, 2019, 37 (04) :3221-3240
[24]   Shear wave velocity and stiffness of sand: the role of non-plastic fines [J].
Yang, J. ;
Liu, X. ;
Rahman, M. M. ;
Lo, R. ;
Goudarzy, M. ;
Schanz, T. .
GEOTECHNIQUE, 2018, 68 (10) :931-934
[25]   Macro- and Micromechanical Assessment of the Influence of Non-Plastic Fines and Stress Anisotropy on the Dynamic Shear Modulus of Binary Mixtures [J].
Goudarzy, Meisam ;
Sarkar, Debdeep .
FRACTAL AND FRACTIONAL, 2022, 6 (04)
[26]   The effect of tamping conditions on undrained shear strengths of a non-plastic sandy silt tailings [J].
Reid, David ;
Fanni, Riccardo ;
DiDonna, Peter .
CANADIAN GEOTECHNICAL JOURNAL, 2022, 59 (06) :783-795
[27]   Strength-dilatancy relation of sand containing non-plastic fines [J].
Xiao, Y. ;
Xiang, J. ;
Liu, H. ;
Ma, Q. .
GEOTECHNIQUE LETTERS, 2017, 7 (02) :204-210
[28]   Predicting undrained static response of sand with non-plastic fines in terms of equivalent granular state parameter [J].
Porcino, D. D. ;
Diano, V ;
Triantafyllidis, T. ;
Wichtmann, T. .
ACTA GEOTECHNICA, 2020, 15 (04) :867-882
[29]   The Effect of Non-Plastic Fines Content on Pore Pressure Generation Rates in Cyclic Triaxial and Cyclic Direct Simple Shear Tests [J].
Polito, Carmine P. ;
Martin, James R. ;
Sibley, Erin L. D. .
ENG, 2024, 5 (04) :2410-2427
[30]   Influence of non-plastic fines content on maximum shear modulus of granular materials [J].
Goudarzy, Meisam ;
Rahman, Md. Mizanur ;
Koenig, Diethard ;
Schanz, Tom .
SOILS AND FOUNDATIONS, 2016, 56 (06) :973-983