Development of a stand-alone steam methane reformer for on-site hydrogen production

被引:28
作者
Yang, Jung-Il [1 ]
Kim, Tae Wan [1 ]
Park, Ji Chan [1 ]
Lim, Tak-Hyoung [1 ]
Jung, Heon [1 ]
Chun, Dong Hyun [1 ]
机构
[1] Korea Inst Energy Res, Clean Fuel Lab, 152 Gajeong Ro, Daejeon 305343, South Korea
关键词
Small stationary reformer; Stand-alone type; Steam methane reforming; Heat-exchanger type reformer; Hydrogen production rate;
D O I
10.1016/j.ijhydene.2015.10.154
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
A small, stationary reformer designed as a stand-alone and self-sustaining type was developed for on-site hydrogen (H-2) production. We created a compact reformer to produce H-2 at a rate of 1 Nm(3)/h using the previously reported reaction kinetics of steam methane reforming (SMR). Both catalysts for the compact reformer - i.e., 15 wt% and 20 wt% Ni/gamma-Al2O3 - showed good activity, with CH4 conversion exceeding 90% at 655 degrees C and a contact time of 3.0 gcath/mol, which were considered critical thresholds in the development of a small, compact stationary reformer. At an H-2 production rate of 1 Nm(3)/h, the catalyst amount was calculated to be 167.8 g and the reformer length required to charge the catalyst was 613 mm, with a diameter of 1 inch. The CH4 conversion and H-2 production rates achieved with the compact reformer using the 20 wt% Ni/gamma-Al2O3 catalyst at 738 degrees C were 97.9% and 1.22 Nm(3)/h, respectively. Furthermore, a heat -exchanger type reformer was developed to efficiently carry out the highly endothermic SMR reaction for on-site H-2 production. This reformer comprised a tube side (in which the catalysts were charged and the SMR reaction took place by feeding the reactants) and a shell side (in which the heat for the endothermic reaction was supplied by CH4 combustion). Reforming activities were evaluated using the active 20 wt% Ni//gamma-Al2O3 catalyst, depending on the reactants' gas hourly space velocity (GHSV). The H-2 production rate increased as the GHSV increased. Finally, the reformer produced a CH4 conversion of 98.0% and an H-2 production rate of 1.97 Nm(3)/h at 745 degrees C, as well as a high reactants' GHSV of 10,000 Therefore, the heat exchanger type reformer proved to be an effective system for conducting the highly endothermic SMR reaction with a high reactants' GHSV to yield a high rate of H-2 production. (C) 2016 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码:8176 / 8183
页数:8
相关论文
共 15 条
[1]  
[Anonymous], ON SIT HYDR GEN SYST
[2]  
[Anonymous], 2009, HYDR PROD ROADM FREE
[3]  
[Anonymous], 2011, HYDR FACT SHEET
[4]   Small stationary reformers for H2 production from hydrocarbons [J].
Calo, Eugenio ;
Giannini, Antonella ;
Monteleone, Giulia .
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2010, 35 (18) :9828-9835
[5]   Review and evaluation of hydrogen production methods for better sustainability [J].
Dincer, Ibrahim ;
Acar, Canan .
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2015, 40 (34) :11094-11111
[6]   A general framework for the assessment of solar fuel technologies [J].
Herron, Jeffrey A. ;
Kim, Jiyong ;
Upadhye, Aniruddha A. ;
Huber, George W. ;
Maravelias, Christos T. .
ENERGY & ENVIRONMENTAL SCIENCE, 2015, 8 (01) :126-157
[7]   The kinetics of steam methane reforming over a Ni/γ-Al2O3 catalyst for the development of small stationary reformers [J].
Kim, Tae Wan ;
Park, Ji Chan ;
Lim, Tak-Hyoung ;
Jung, Heon ;
Chun, Dong Hyun ;
Lee, Ho Tae ;
Hong, Sungjun ;
Yang, Jung-Il .
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2015, 40 (13) :4512-4518
[8]  
Kolb G., 2008, Fuel Processing: For Fuel Cells
[9]  
Naterer GF, 2010, 18 WORLD HYDR EN C
[10]  
OGDEN JM, 2002, IEAH2TR02002