Theoretical study on impingement heat transfer with single-phase free-surface slot jets

被引：65

作者：

Chen, YC ^{[1
]}

Ma, CF ^{[1
]}

Qin, M ^{[1
]}

Li, Y ^{[1
]}

机构：

[1] Beijing Univ Technol, Coll Environm & Energy Engn, Key Lab Minist Educ, Key Lab Beijing Municipal, Beijing 10022, Peoples R China

来源：

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER | 2005年 / 48卷 / 16期

基金：

中国国家自然科学基金;

关键词：

slot jet impingement; heat transfer; laminar boundary layer; theoretical analysis;

D O I：

10.1016/j.ijheatmasstransfer.2005.02.027

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

A theoretical analysis was conducted to characterize heat transfers from horizontal surfaces to normally impinging slot jets under arbitrary-heat-flux condition. The thermal and hydraulic boundary layers of laminar flow were divided into four regions of flow along heat transfer surfaces including a stagnation zone and three wall jet zones, from which general expressions of heat transfer coefficients were obtained. Furthermore, these results were compared with experimental and analytical data available in published literature. Good agreements were observed from the comparisons. (c) 2005 Elsevier Ltd. All rights reserved.

引用

页码：3381 / 3386

页数：6

共 22 条

[1] A numerical study of the unsteady flow and heat transfer in a transitional confined slot jet impinging on an isothermal surface
Chiriac, VA
Ortega, A
[J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2002, 45 (06) : 1237 - 1248
[2] DOVNS SJ, 1987, 87HT35 ASME
[3] Jiji L. M., 1988, COOLING TECHNOLOGY E, P332
[4] Kendoush AA, 1998, CHEM ENG PROCESS, V37, P223
[5] Kiryu M., 1986, AUTOMOBILE TECHNOLOG, V40, P1154
[6] Kohing F.C., 1985, IRON STEEL ENG, V62, P30
[7] Heat transfer behaviors of a confined slot jet impingement
Lin, ZH
Chou, YJ
Hung, YH
[J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 1997, 40 (05) : 1095 - 1107
[8] LIU HZ, 1991, THEORY BOUNDARY LAYE
[9] CONVECTIVE HEAT-TRANSFER BY IMPINGEMENT OF CIRCULAR LIQUID JETS
LIU, X
LIENHARD, JH
LOMBARA, JS
[J]. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 1991, 113 (03): : 571 - 582
[10] Ma C.F., 1983, Heat Transfer in Electronic Equipment, V28, P5

← 1 2 3 →