CNC turning process parameters optimization on Aluminium 6082 alloy by using Taguchi and ANOVA

被引：75

作者：

Palaniappan, S. P. ^{[1
]}

Muthukumar, K. ^{[1
]}

Sabariraj, R. V. ^{[2
]}

Kumar, S. Dinesh ^{[3
]}

Sathish, T. ^{[4
]}

机构：

[1] Chendhuran Coll Engn & Technol, Dept Mech Engn, Pudukkottai 622507, Tamil Nadu, India

[2] Lakshmi Subramanian Polytech Coll, Dept Mech Engn, Madurai 625324, Tamil Nadu, India

[3] St Peters Inst Higher Educ & Res, Chennai 600054, Tamil Nadu, India

[4] SMR East Coast Coll Engn & Technol, Thanjavur 614612, Tamil Nadu, India

来源：

MATERIALS TODAY-PROCEEDINGS | 2020年 / 21卷

关键词：

Al6082; Turing parameters; Optimization; Taguchi; ANOVA; Chip temperature; DIESEL;

D O I：

10.1016/j.matpr.2019.10.053

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper experimentally investigates the machining of Aluminium 6082 alloy to identify the optimal parameters for CNC turning process. A plan of experiments based on L27 orthogonal array was established and turning experiments were conducted with prefixed cutting parameters for Aluminium 6082 using tungsten carbide cutting tool. The turning parameters were spindle speed, feed rate and depth of cut for the responses of surface roughness and material removal rate by using Taguchi and ANOVA and also the temperature on chip compared for each experimental condition. (C) 2019 Elsevier Ltd. All rights reserved.

引用

页码：1013 / 1021

页数：9

共 31 条

[1]

[Anonymous], INT J MECH PROD ENG

[2]

Chandramohan D., 2019, J. Bio. Tribocorros, V5, P66, DOI [10.1007/s40735-019-0259-z, DOI 10.1007/S40735-019-0259-Z]

[3]

Gurusami K., 2019, INT J AMBIENT ENERGY, P1

[4]

Karthick S., 2017, J ADV RES DYN CONTRO, V18, P2679

[5]

Karthickeyan N.K., 2019, INT J INNOV TECHNOL, V8, P3359

[6] Enhancement of thermal conductivity in a plate heat exchanger by using nanoparticles CNT, Al2O3, surfactant with de-ionised water as a coolant [J].

Kumar, S. Dinesh ;

Purushothaman, K. .

INTERNATIONAL JOURNAL OF AMBIENT ENERGY, 2021, 42 (06) :648-651

[7] Effect of ZrB2 content on mechanical and microstructural characterization of AA6063 aluminum matrix composites [J].

Mohanavel, V. ;

Kumar, S. Suresh ;

Sathish, T. ;

Anand, K. T. .

MATERIALS TODAY-PROCEEDINGS, 2018, 5 (05) :13601-13605

[8]

Parthiban A., 2018, INT J MECH ENG TECHN, V09, P2263

[9] Experimental investigation of machined hole and optimization of machining parameters using electrochemical machining [J].

Sathish, T. .

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2019, 8 (05) :4354-4362

[10]

Sathish T, 2018, J APPL FLUID MECH, V11, P31

← 1 2 3 4 →