Wear behavior of AISI D2 steel by enhanced ion nitriding with atomic attrition

被引：12
作者：
Cho, Kyun Taek [1 ,2 ]
Lee, Young-Kook [2 ]
Lee, Won Beom [1 ]
机构：
[1] Korea Inst Ind Technol, Heat Treatment Technol R&BD Grp, Inchon, South Korea
[2] Yonsei Univ, Dept Met Engn, Seoul 120749, South Korea
来源：
TRIBOLOGY INTERNATIONAL | 2015年 / 87卷
关键词：
Plasma nitriding; Ion bombardment; Oxide layer; Enhanced surface hardness; SURFACE-ROUGHNESS; TI-6AL-4V ALLOY; TEMPERATURE; COATINGS; HARDNESS; FATIGUE;
D O I：
10.1016/j.triboint.2015.02.020
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
An experimental study was performed to investigate the effect of atomic attrition on wear behavior of AISI D2 steel. Wear tests were conducted under three different loads (5, 10, and 20 N) and sliding speeds (100, 200, and 500 rpm), using ball-on-disk type tester and SiC ball. After wear test, the specimen nitrided with ion bombardment showed superior wear behavior. The enhanced hardness by ion bombardment could have a beneficial effect on increased wear resistance. In addition, a wider and more adhesive oxide layer formed on the worn surface of ion-bombarded specimen, because of the rougher structure on the surface by ion bombardment, could lead the surface to withstand wear for longer duration time, acting as a protective layer. (C) 2015 Published by Elsevier Ltd.
引用
收藏
页码：82 / 90
页数：9
相关论文
共 20 条
  • [1] Anomalous ion accelerated bulk diffusion of interstitial nitrogen - art. no. 065901
    Abrasonis, G
    Möller, W
    Ma, XX
    [J]. PHYSICAL REVIEW LETTERS, 2006, 96 (06)
  • [2] Micro-dimpled surface by ultrasonic nanocrystal surface modification and its tribological effects
    Amanov, A.
    Cho, I. S.
    Pyoun, Y. S.
    Lee, C. S.
    Park, I. G.
    [J]. WEAR, 2012, 286 : 136 - 144
  • [3] Enhanced surface hardening of AISI D2 steel by atomic attrition during ion nitriding
    Cho, Kyun Taek
    Song, Kyung
    Oh, Sang Ho
    Lee, Young-Kook
    Lee, Won Beom
    [J]. SURFACE & COATINGS TECHNOLOGY, 2014, 251 : 115 - 121
  • [4] Comparative study of the tribological behavior under hybrid lubrication of diamond-like carbon films with different adhesion interfaces
    Costa, R. P. C.
    Lima-Oliveira, D. A.
    Marciano, F. R.
    Lobo, A. O.
    Corat, E. J.
    Trava-Airoldi, V. J.
    [J]. APPLIED SURFACE SCIENCE, 2013, 285 : 645 - 648
  • [5] Wear behaviour of plasma nitrided tool steels
    Devi, MU
    Chakraborty, TK
    Mohanty, ON
    [J]. SURFACE & COATINGS TECHNOLOGY, 1999, 116 : 212 - 221
  • [6] The effect of substrate surface roughness on the wear of DLC coatings
    Jiang, JR
    Arnell, RD
    [J]. WEAR, 2000, 239 (01) : 1 - 9
  • [7] AN INVESTIGATION OF THE PROPERTIES AND WEAR BEHAVIOR OF PLASMA-NITRIDED HOT-WORKING STEEL (H13)
    KARAMIS, MB
    [J]. WEAR, 1991, 150 (1-2) : 331 - 342
  • [8] Surface morphology in engineering applications: Influence of roughness on sliding and wear in dry fretting
    Kubiak, K. J.
    Liskiewicz, T. W.
    Mathia, T. G.
    [J]. TRIBOLOGY INTERNATIONAL, 2011, 44 (11) : 1427 - 1432
  • [9] ACTIVATION-ENERGY OF OXIDATION IN WEAR
    MOLGAARD, J
    SRIVASTAVA, VK
    [J]. WEAR, 1977, 41 (02) : 263 - 270
  • [10] Effects of plasma carburizing and DLC coating on friction-wear characteristics, mechanical properties and fatigue strength of stainless steel
    Morita, Tatsuro
    Hirano, Yasunori
    Asakura, Keita
    Kumakiri, Tadashi
    Ikenaga, Masaru
    Kagaya, Chuji
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 558 : 349 - 355
12