Influence of Technological Parametrs on the Dimension of Threaded Parts Generated with PLA Matherial by FDM 3D Printing

被引:0
作者
Vasilescu, Mircea Dorin [1 ]
Fleser, Traian [1 ]
机构
[1] Politehn Univ Timisoara, 1 Mihai Viteazul Blvd, Timisoara 300222, Romania
关键词
3D printing; fabrication parts; dimension threaded; PLA material; FDM printing;
D O I
暂无
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
In this research are establish the technology of 3D printable parts by the principle of FDM 3D printed for threaded made by PLA, ABS, Nylon or PETG. In the paper are present first the dimensional generation and specific aspects that need to be considered to produce threaded with internal teeth of the metric, round or trapezoidal type. Generating the threaded appeared as a necessity for the reconditioning or made of the components of the processing machines made both in the process of elaboration of the bachelor's and the laboratory works, with reduced energy resource consumption and low pollution as low as possible. After the construction, it is identify the dimension that have implications for both mechanical and kinematic resistance to make a product with good cinematic and functional characteristics. After that are made an analysis of the layers generated, both from the computer simulation and from the point of view of the analysis of layers physically generated for a threaded with internal teeth. At the end are presented which are necessary for operations to obtain a product with good features starting from two types of thread generated 8x2 and 10x2 moments.
引用
收藏
页码:718 / 722
页数:5
相关论文
共 50 条
  • [41] Influence of the Corner Angle of 3D Printing Parts on Temperature and Thermal Stress
    Wang Fuyu
    Liu Weijun
    Zhao Jibing
    Kong Yuan
    Zhao Yuhui
    Lai Youbin
    Han Wenchao
    RARE METAL MATERIALS AND ENGINEERING, 2016, 45 (02) : 515 - 521
  • [42] Technological Advances in 3D Printing of Radomes
    Li J.
    Li D.
    Li X.
    Gao S.
    Wang Y.
    Wan F.
    Liu R.
    Cailiao Daobao/Materials Reports, 2022, 36 (22):
  • [43] 3D Printing of Plant-Derived Compounds and a Proposed Nozzle Design for the More Effective 3D FDM Printing
    Sharma, Vedant
    Roozbahani, Hamid
    Alizadeh, Marjan
    Handroos, Heikki
    IEEE ACCESS, 2021, 9 : 57107 - 57119
  • [44] Mechanical properties and biodegradability of samples obtained by 3D printing using FDM technology from PLA filament with by-products
    Mazur, Jacek
    Sobczak, Pawel
    Panasiewicz, Marian
    Lusiak, Patrycja
    Krajewska, Marta
    Findura, Pavol
    Obidzinski, Slawomir
    Zukiewicz-Sobczak, Wioletta
    SCIENTIFIC REPORTS, 2025, 15 (01):
  • [45] An improved tensile strength and failure mode prediction model of FDM 3D printing PLA material: Theoretical and experimental investigations
    Shi, Luo-Ke
    Li, Peng-Cheng
    Liu, Chang-Ru
    Zhu, Jia-Xu
    Zhang, Tian-Hao
    Xiong, Gang
    JOURNAL OF BUILDING ENGINEERING, 2024, 90
  • [46] The Production Possibility of the Antimicrobial Filaments by Co-Extrusion of the PLA Pellet with Chitosan Powder for FDM 3D Printing Technology
    Mania, Szymon
    Ryl, Jacek
    Jinn, Jia-Rong
    Wang, Ya-Jane
    Michalowska, Anna
    Tylingo, Robert
    POLYMERS, 2019, 11 (11)
  • [47] Fabrication of suspended uniform polymer microfibers by FDM 3D printing
    Lu, Qing
    Song, Ki-Young
    Feng, Yue
    Xie, Jing
    CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY, 2021, 32 : 179 - 187
  • [48] Solid Dispersion Formulations by FDM 3D Printing-A Review
    Khalid, Garba M.
    Billa, Nashiru
    PHARMACEUTICS, 2022, 14 (04)
  • [49] Critical review of FDM 3D printing of PLA biocomposites filled with biomass resources, characterization, biodegradability, upcycling and opportunities for biorefineries
    Bhagia, Samarthya
    Bornani, Kamlesh
    Agrawal, Ruchi
    Satlewal, Alok
    Durkovic, Jaroslav
    Lagana, Rastislav
    Bhagia, Meher
    Yoo, Chang Geun
    Zhao, Xianhui
    Kunc, Vlastimil
    Pu, Yunqiao
    Ozcan, Soydan
    Ragauskas, J. Arthur
    APPLIED MATERIALS TODAY, 2021, 24
  • [50] 3D printing of complex shaped alumina parts
    Mamatha, Sirisala
    Biswas, Papiya
    Ramavath, Pandu
    Das, Dibakar
    Johnson, Roy
    CERAMICS INTERNATIONAL, 2018, 44 (16) : 19278 - 19281