Effects of yttrium and silicon contents in Hastelloy-X built by selective laser melting process

The effects of the addition of yttrium (Y) on the creep and tensile properties of Hastelloy-X built by a selective laser melting (SLM) process were studied. Two alloys were chosen: Hastelloy-X (Y-free) as a reference material and a specimen with 0.046 wt% yttrium (Y-added). Post-processing solution heat treatment (ST) was conducted at 1177 degrees C in air for 2 h, followed by air cooling to obtain appreciable mechanical properties. In the as-built condition, the Y-free specimen showed the formation of cracks; this was mainly due to the segregation of solute elements such as W, Si, and C at the grain boundaries and interdendritic regions. The Y-added specimen was free of cracks and showed longer creep life and rupture elongation than the Y-free specimen because the reduced Si content in the Y-added alloy eliminated cracking. In addition, the formation of Y2O3 oxides improved tensile elongation and creep properties by stabilizing solute oxygen contamination. After ST, both vertical and horizontal Y-added specimens presented better creep properties than ST Y-free specimens. This was mainly due to grain morphological change, carbides, and oxides formation at the grain boundary after ST heat treatment in the Y-added specimens. (C) 2021 Elsevier B.V. All rights reserved.