Nanometer-scale, fully lamellar microstructure in an aged TiAl-based alloy

被引：47
作者：
Sun, YQ [1 ]
机构：
[1] Univ Illinois, Dept Mat Sci & Engn, Urbana, IL 61801 USA
来源：
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE | 1998年 / 29卷 / 11期
关键词：
D O I：
10.1007/s11661-998-0308-6
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This article reports on the optical microscopy, transmission electron microscopy, and hardness experiments conducted on a Ti-45Al-2Cr-Nb alloy that was aged between 400 degrees C and 800 degrees C. The aging treatment was conducted on specimens that were quenched to retain the high-temperature alpha/alpha 2 structure. The aging treatment produced an ultrafine, nanometer-scale, fully lamellar microstructure, ranging from 8 nm in thickness at 600 degrees C to 17 nm at 700 degrees C. The fine lamellar microstructure produced a large strengthening effect, raising the hardness to 540 on the Vickers scale. The lamellar structure nucleates preferentially at grain boundaries and grows into the grain interior.
引用
收藏
页码：2679 / 2685
页数：7
相关论文
共 50 条
[41]   Microstructure and mechanical properties of a TiAl-based powder alloy containing carbon [J].
Gouma, PI ;
Davey, SJ ;
Loretto, MH .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1998, 241 (1-2) :151-158
[42]   Microstructure and fatigue properties of TiAl-based alloy with different tungsten contents [J].
Zhen-Jun Yang ;
Hong-Liang Sun ;
Ze-Wen Huang ;
De-Gui Zhu ;
Liang-Hui Wang .
Rare Metals, 2016, 35 :113-117
[43]   Microstructure and mechanical properties of a TiAl-based powder alloy containing carbon [J].
Gouma, P.I. ;
Davey, S.J. ;
Loretto, M.H. .
Materials Science and Engineering A, 1998, A241 (1-2) :151-158
[44]   Fabrication of fully dense TiAl-based composite sheets with a novel microlaminated microstructure [J].
Cui, Xiping ;
Fan, Guohua ;
Geng, Lin ;
Wang, Yin ;
Zhang, Hongwei ;
Peng, Hua-Xin .
SCRIPTA MATERIALIA, 2012, 66 (05) :276-279
[45]   Oxidation behavior of fully dense TiAl-based composites with a controlled laminated microstructure [J].
Yang, Xuesong ;
Li, Xuewen ;
Zhang, Tongtong ;
Xu, Chao ;
Fan, Guohua ;
Zhang, Jie .
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2021, 14 :262-268
[46]   Effect of tungsten addition on microstructure and mechanical properties of TiAl-based alloy [J].
Sun, Hongliang ;
Huang, Zewen ;
Zhu, Degui .
APPLIED MECHANICS AND MATERIALS I, PTS 1-3, 2013, 275-277 :1884-1889
[47]   Effect of Heat Treatment on Microstructure and Mechanical Properties of TiAl-Based Alloy [J].
Zhao, Gao-Feng ;
Sun, Hong-Liang ;
Guo, Tao ;
Liu, Jiao ;
Wang, Xiao-Han ;
Zhao, Jia-Jian .
INTERNATIONAL CONFERENCE ON MECHANICS AND MATERIALS ENGINEERING (ICMME 2014), 2014, :349-353
[48]   Microstructure and fatigue properties of TiAl-based alloy with different tungsten contents [J].
Yang, Zhen-Jun ;
Sun, Hong-Liang ;
Huang, Ze-Wen ;
Zhu, De-Gui ;
Wang, Liang-Hui .
RARE METALS, 2016, 35 (01) :113-117
[49]   Microstructure and fatigue properties of TiAl-based alloy with different tungsten contents [J].
Zhen-Jun Yang ;
Hong-Liang Sun ;
Ze-Wen Huang ;
De-Gui Zhu ;
Liang-Hui Wang .
Rare Metals, 2016, 35 (01) :113-117
[50]   Effect of extrusion temperature on the microstructure of a powder metallurgy TiAl-based alloy [J].
Hsiung, LM ;
Nieh, TG ;
Clemens, DR .
SCRIPTA MATERIALIA, 1997, 36 (02) :233-238
12345