Experimental Investigation on Stress-Strain Curves of Reactive Powder Concrete under Uniaxial Compression

被引:3
作者
Ju, Yanzhong [1 ]
Wang, Dehong [1 ]
Jiang, Fei [1 ]
机构
[1] NE Dianli Univ, Sch Architecture Engn, Jilin 132012, Jilin Province, Peoples R China
来源
ADVANCES IN BUILDING MATERIALS, PTS 1-3 | 2011年 / 261-263卷
关键词
Reactive powder concrete; Stee1 fiber content; Mechanical properties; Stress-strain curve; Experimental research;
D O I
10.4028/www.scientific.net/AMR.261-263.192
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
Based on experiments of uniaxial compression and flexural experiments, the basic mechanical properties (compressive strength and flexural strength) of reactive powder concrete (RPC) were investigated, the effect of the steel fiber content on mechanical properties of RPC was studied in this work. The results indicate that the axial compressive strength of RPC had no obvious change with the change of steel fiber content. When the steel fiber content varied from 1.0% to 2.0%, the flexural strength of RPC had no obvious change. When the steel fiber content varied from 2.0% to 5.0%, the flexural strength of RPC increased dramaticlly with the increase of steel fibers content. According to experiment curves, an equation for the compressive stress-strain curve of RPC was deduced with different steel fiber content.
引用
收藏
页码:192 / 196
页数:5
相关论文
共 7 条
[1]  
Guo Z., 1982, J BUILDING STRUCTURE, V3, P1
[2]  
GUO Zhenhai, 1997, STRENGTH DEFORMATION, P24
[3]  
JU Yanzhong, 2006, J NE DIANLI U, P10
[4]  
Li Li, 2008, IND CONSTRUCTION, V38, P773
[5]   COMPOSITION OF REACTIVE POWDER CONCRETES [J].
RICHARD, P ;
CHEYREZY, M .
CEMENT AND CONCRETE RESEARCH, 1995, 25 (07) :1501-1511
[6]   MICROMECHANICAL MODEL OF CRACK-GROWTH IN FIBER-REINFORCED CERAMICS [J].
RUBINSTEIN, AA ;
XU, K .
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 1992, 40 (01) :105-125
[7]   Utilization of fly ash and ground granulated blast furnace slag as an alternative silica source in reactive powder concrete [J].
Yazici, Halit ;
Yigiter, Hueseyin ;
Karabulut, Anil S. ;
Baradan, Buelent .
FUEL, 2008, 87 (12) :2401-2407