Experimental and numerical study on the falling film flow characteristics outside circular tube applied in floating liquefied natural gas (FLNG) under offshore conditions

Spiral wound heat exchanger (SWHE) relying on falling film evaporation and boiling is often used for FLNG. The performance of SWHE can be impacted strongly by the motion of the FLNG caused by the wave and typhoon. The falling film characteristics of SWHE outside circular tube are studied experimentally and numerically by a visualization experimental device based on the high-speed camera and a numerical model based on the dynamic grid. The results show that the wave crest of the liquid film moves to the titled side under offshore conditions. The evolution process of falling film flow pattern outside circular tube with the tilt angle of 9 degrees can be divided into four stages: droplet formation and migration, liquid column formation and migration, liquid column coalescence, liquid sheet formation. A correlation permitting the prediction of the falling film flow pattern outside circular tube and the other one permitting the prediction of the average film thickness of circular tube are developed respectively based on the experimental and numerical data.