Experimental study of nanoparticle as oil additives

被引：5
作者：
Zhang Yong [1 ]
Zhao Xiaojing [2 ]
He Qiang [1 ]
Jun Ye [3 ]
Niu Qinpo [3 ]
机构：
[1] Anyang Inst Technol, Sch Math & Phys, Anyang 455000, South Korea
[2] Anyang Inst Technol, Sch Mech Engn, Anyang 455000, South Korea
[3] Luoyang Bearing Res Inst, LuoYang 471039, South Korea
来源：
FRONTIERS OF MANUFACTURING SCIENCE AND MEASURING TECHNOLOGY, PTS 1-3 | 2011年 / 230-232卷
关键词：
nanoparticle; additive; tribologica; friction coefficient; wear scar diameter; TRIBOLOGICAL PROPERTIES; CU NANOPARTICLES; LUBRICANT;
D O I：
10.4028/www.scientific.net/AMR.230-232.288
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Cu nanoparticles as N32 base oil additives were studied in the paper. The structure of Cu nanoparticles was characterized by Transmission Electron Microscopy (TEM) and X-ray powder diffraction spectroscope (XRD). The widely used steel-steel friction system was chosen to test the feasibility and practicality of Cu nanoparticles as bearing lubricant additives. The results show that N32 base oil with 0.5% Cu nanoparticle can improve the test sample contact fatigue life than pure N32 base oil.
引用
收藏
页码：288 / +
页数：2
相关论文
共 50 条
  • [41] MULTIFUNCTIONAL ALKYLPHENOLYATE ADDITIVES TO MOTOR OIL
    Nagiyeva, Elmira A.
    Gadirov, Ali A.
    Farzaliyev, Vagif M.
    Mammadova, Rakhila A.
    Nasirova, Sakhila I.
    PROCESSES OF PETROCHEMISTRY AND OIL REFINING, 2023, 24 (03): : 554 - 562
  • [42] RHEOLOGICAL AND TRIBOLOGICAL PROPERTIES OF INDUSTRIAL OIL WITH MESOGENIC ADDITIVES AND CARBON NANOTUBES
    Popova, M. N.
    Zharova, M. A.
    Usol'tseva, N. V.
    Smirnova, A. I.
    Bogdanov, V. S.
    LIQUID CRYSTALS AND THEIR APPLICATION, 2014, 14 (01): : 52 - 61
  • [43] Experimental investigation of the forced convective boiling heat transfer of R-600a/oil/nanoparticle
    Baqeri, S.
    Akhavan-Behabadi, M. A.
    Ghadimi, B.
    INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2014, 55 : 71 - 76
  • [44] Experimental and quantum chemical investigations on the oxidative stability of sesame oil base stock with synthetic antioxidant additives
    Sabarinath, Sankaran Nair
    Nair, Kumarapillai Prabhakaran
    Rajendrakumar, Perikinalil Krishnan
    LUBRICATION SCIENCE, 2019, 31 (05) : 179 - 193
  • [45] Experimental Analysis of Effect to Friction of Commercial Oil Additive Used in Automobiles
    Simsek, Mithat
    Salman Nteziyaremye, Ozlem
    Kaleli, Emrullah Hakan
    Tunay, Recai Fatih
    Durak, Ertugrul
    JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI, 2023,
  • [46] Comparative Study on the Effect of Different Lubricating Oil Additives on the Tribological Properties of Bearing Steel
    Xia, Zhaocai
    Tang, Wencheng
    Li, Kaiyuan
    Wang, Hao
    SAE INTERNATIONAL JOURNAL OF MATERIALS AND MANUFACTURING, 2020, 13 (01) : 19 - 26
  • [47] The tribological study of novel phosphorous-nitrogen type phosphoramidate additives in rapeseed oil
    Yan, Jincan
    Bu, Junmin
    Bai, Xuefeng
    Li, Jing
    Ren, Tianhui
    Zhao, Yidong
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2012, 226 (J5) : 377 - 388
  • [48] Study on using graphene and graphite nanoparticles as fuel additives in waste cooking oil biodiesel
    Sharma, Vikas
    Hossain, Abul Kalam
    Ahmed, Alamgir
    Rezk, Ahmed
    FUEL, 2022, 328
  • [49] Study on the safety of mineral and synthetic oil added commonly used extreme pressure additives
    Chen, Zhuojun
    Feng, Longlong
    Li, Baoliang
    Yue, Jinjin
    Wu, Yingliang
    Dai, Zhenning
    FRONTIERS OF ADVANCED MATERIALS AND ENGINEERING TECHNOLOGY, PTS 1-3, 2012, 430-432 : 1386 - +
  • [50] Numerical and Experimental Study of Gas Phase Nanoparticle Synthesis Using NanoDOME
    La Civita, Giorgio
    Ugolini, Edoardo
    Patelli, Nicola
    Piccioni, Alberto
    Migliori, Andrea
    Pasquini, Luca
    Ghedini, Emanuele
    NANOMATERIALS, 2023, 13 (08)
12345