Theoretical analysis of ammonium-perchlorate based composite propellants containing small size particles of boron

被引:4
|
作者
Figueiredo, Paulo A. [1 ]
Brojo, Francisco M. [1 ]
机构
[1] Univ Beira Interior, Dept Ciencias Aerosp, P-6200001 Covilha, Portugal
来源
4TH INTERNATIONAL CONFERENCE ON ENERGY AND ENVIRONMENT RESEARCH, ICEER 2017 | 2017年 / 136卷
关键词
Propellant; RDX; rocket engine; specific impulse; SOLID-PROPELLANTS; ROCKET MOTORS; COMBUSTION; IGNITION; ALUMINUM;
D O I
10.1016/j.egypro.2017.10.320
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
One of the main goals for the scientific/military rocket industry is to increase the operational burning time, thus the specific impulse. New homogeneous and heterogeneous propellants were tested and metallic fuels were added in the mixture to obtain best performance. To study heterogeneous propellant, containing large amount of fine boron and ammonium perchlorate, it is appropriate to estimate the combustion products to evaluate/obtain the values of the specific impulse, density, Mach number and mass flow of the mixture. Several composite propellant mixtures, ammonium perchlorate, nitramides (RDX Cyclotrimethylene trinitramide), were defined with or without addiction of small particles of Boron and modeled. The energetic properties of boron and progress of boron particles on the burning surface of the ammonium perchlorate based composite propellants was modeled used a numerical algorithm. This paper reports the analysis of the influence of boron in the performance parameters for ammonium perchlorate based composite propellants. (C) 2017 The Authors. Published by Elsevier Ltd.
引用
收藏
页码:202 / 207
页数:6
相关论文
共 8 条
  • [1] Burning rate dependence of composite propellants on ammonium perchlorate particle size
    Iqbal, Muhammad Mazhar
    Raza Ch, Sajid
    THEORY AND PRACTICE OF ENERGETIC MATERIALS, VOL VII, 2007, : 376 - 380
  • [2] Effect of aluminum-based additives on the ignition performance of ammonium perchlorate-based composite solid propellants
    Liu, Mengying
    Yu, Wenhao
    Li, Shipeng
    ACTA ASTRONAUTICA, 2023, 204 : 321 - 330
  • [3] Nano Additives and Plateau Burning Rates of Ammonium-Perchlorate-Based Composite Solid Propellants
    Stephens, Matthew A.
    Petersen, Eric L.
    Reid, David L.
    Carro, Rodolphe
    Seal, Sudipta
    JOURNAL OF PROPULSION AND POWER, 2009, 25 (05) : 1068 - 1078
  • [4] Microflower-like Fe-Co-MOF with enhanced catalytic performance for decomposition of ammonium perchlorate and combustion of ammonium perchlorate-based composite propellants
    Feng, Chenhe
    Ye, Baoyun
    Cheng, Wangjian
    Shi, Songchao
    Zhao, Fengqi
    An, Chongwei
    Wang, Jingyu
    CASE STUDIES IN THERMAL ENGINEERING, 2024, 56
  • [5] Experimental data and model predictions of aluminium agglomeration in ammonium perchlorate-based composite propellants including plateau-burning formulations
    Anand, K. V.
    Roy, Aviral
    Mulla, Irfan
    Balbudhe, Kishor
    Jayaraman, K.
    Chakravarthy, S. R.
    PROCEEDINGS OF THE COMBUSTION INSTITUTE, 2013, 34 : 2139 - 2146
  • [6] Effect of Boron-Aluminium Particles on Rheological Properties of AP/HTPB Based Bi-Curative Composite Solid Propellants
    Shahid, Muhammad
    Niazi, Muhammad Bilal Khan
    Jahan, Zaib
    PROPELLANTS EXPLOSIVES PYROTECHNICS, 2025, 50 (02)
  • [7] Particle size control and performance analysis of the ammonium perchlorate-based molecular perovskite energetic material
    Xiao, Guangwei
    An, Erhai
    Zhang, Xueli
    Tan, Yingxin
    Qin, Qingfeng
    Deng, Peng
    Cao, Xiong
    MATERIALS TODAY COMMUNICATIONS, 2024, 41
  • [8] Fine-tuning the mechanical properties of hydroxyl-terminated polybutadiene/ammonium perchlorate-based composite solid propellants by varying the NCO/OH and triol/diol ratios
    Hocaoglu, Ö
    Özbelge, T
    Pekel, F
    Özkar, S
    JOURNAL OF APPLIED POLYMER SCIENCE, 2002, 84 (11) : 2072 - 2079