Design of novel nozzles for higher interlayer strength of 3D printed cement paste

被引：34

作者：

He, Lewei ^{[1
,2
]}

Tan, Jolyn Ze Mei ^{[2
]}

Chow, Wai Tuck ^{[2
]}

Li, Hua ^{[2
]}

Pan, Jiahui ^{[1
]}

机构：

[1] South China Normal Univ, Sch Software, Guangzhou 510631, Peoples R China

[2] Nanyang Technol Univ, Sch Mech & Aerosp Engn, 50 Nanyang Ave, Singapore 639798, Singapore

来源：

ADDITIVE MANUFACTURING | 2021年 / 48卷

关键词：

Cement paste 3D printing; Nozzle design and optimization; Outlet shape; Interface shaper; Side trowel; TENSILE BOND STRENGTH; BEHAVIOR; CONSTRUCTION; CONCRETE; VOLUME;

D O I：

10.1016/j.addma.2021.102452

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In this study, novel nozzles for cement paste 3D printing are designed and optimized for higher interlayer strength via experiment and volume-of-fluid (VOF) based simulation, in terms of various outlet shapes and two nozzle components namely the interface shaper and the side trowel. These nozzles are evaluated experimentally and theoretically based on their performances in the specimen interlayer strength, interfacial shear stress, and cross-sectional geometry. It is concluded that the "Cir3" and the "Kidney" outlet shapes achieve the best performance with the paste water-cement (w/c) ratio ranging from 0.21 to 0.23, subject to the nozzle stand-off distance of 12 mm and printing speed of 60 mm/s. In addition, the interface shaper and the side trowel are able to further enhance the interlayer strength significantly by up to 2 times, through optimization of the interfacial geometry and minimization of the interlayer notch of 3D printed cement paste. It is also confirmed that the optimal nozzle varies with the w/c ratio of cement paste due to different notch depths that are generated, such that nozzle optimization is required along with material development for cement paste 3D printing.

引用

页数：19

共 59 条

[1] Additive manufacturing: Technology, applications, markets, and opportunities for the built environment [J].

Al Rashid, Ans ;

Khan, Shoukat Alim ;

Al-Ghamdi, Sami G. ;

Koc, Muammer .

AUTOMATION IN CONSTRUCTION, 2020, 118

[2] Investigation of the three-dimensional structure, pressure drop, and heat transfer characteristics of the thermohydraulic flow in a circular pipe with different twisted-tape geometrical configurations [J].

Al-Obaidi, Ahmed Ramadhan ;

Sharif, Adel .

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 2021, 143 (05) :3533-3558

[3] Insights into material design, extrusion rheology, and properties of 3D-printable alkali-activated fly ash-based binders [J].

Alghamdi, Hussam ;

Nair, Sooraj A. O. ;

Neithalath, Narayanan .

MATERIALS & DESIGN, 2019, 167

[4]

[Anonymous], 2020, ASTM Standard Guide, DOI DOI 10.1520/C0305-20

[5]

ASTM, 2021, C39C39M ASTM, DOI DOI 10.1520/C0039_C0039M-21

[6]

ASTM International, 2019, D723419 ASTM INT, DOI [10.1520/D7234-19, DOI 10.1520/D7234-19]

[7] A process classification framework for defining and describing Digital Fabrication with Concrete [J].

Buswell, R. A. ;

da Silva, W. R. Leal ;

Bos, F. P. ;

Schipper, H. R. ;

Lowke, D. ;

Hack, N. ;

Kloft, H. ;

Mechtcherine, V ;

Wangler, T. ;

Roussel, N. .

CEMENT AND CONCRETE RESEARCH, 2020, 134

[8] Superfine cement for improving packing density, rheology and strength of cement paste [J].

Chen, J. J. ;

Kwan, A. K. H. .

CEMENT & CONCRETE COMPOSITES, 2012, 34 (01) :1-10

[9] Effect of printing parameters on interlayer bond strength of 3D printed limestone-calcined clay-based cementitious materials: An experimental and numerical study [J].

Chen, Yu ;

Jansen, Koen ;

Zhang, Hongzhi ;

Rodriguez, Claudia Romero ;

Gan, Yidong ;

Copuroglu, Oguzhan ;

Schlangen, Erik .

CONSTRUCTION AND BUILDING MATERIALS, 2020, 262

[10] Effect of the Mineral Admixtures on Pipe Flow of Pumped Concrete [J].

Choi, Myoung Sung ;

Park, Sung Bum ;

Kang, Su-Tae .

JOURNAL OF ADVANCED CONCRETE TECHNOLOGY, 2015, 13 (11) :489-499

← 1 2 3 4 5 6 →