The Effect of Time and Temperature of Solutionizing Heat Treatment on γ′ Characterization in a Ni-Base Superalloy

被引:7
|
作者
Shajari, Yazdan [1 ]
Razavi, Seyed Hossein [2 ]
Seyedraoufi, Zahra Sadat [3 ]
Samiee, Mohsen [3 ]
机构
[1] Mat & Energy Res Ctr, Karaj 141554777, Iran
[2] Iran Univ Sci & Technol IUST, Sch Met & Mat Engn, Tehran, Iran
[3] Islamic Azad Univ, Dept Mat Engn, Karaj Branch, Karaj, Iran
关键词
Nickel-base superalloys; gamma ' Precipitates; Solutionizing treatment; Characterization; COOLING RATE; MICROSTRUCTURE; BEHAVIOR; HARDNESS; IN738LC;
D O I
10.1007/s13632-021-00760-8
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
Nickel-base superalloys are being used widely in the air and land-based gas turbines. The primary strengthening mechanism of these alloys is the distribution of the gamma'(Ni-3 (Al, Ti)) intermetallic phase. This phase is formed in two stages, including the solutionizing and aging heat treatments. In order to create a structure with the desirable properties, the solutionizing heat treatment is more important than aging. In this research, solutionizing heat treatment was conducted at different temperatures and times, and aging heat treatment was carried out at a constant temperature of 850 degrees C for 24 h. gamma' precipitates characterization was done by scanning electron microscopy and field emission scanning electron microscopy. The results showed that the volume fraction and size of secondary gamma' precipitates decreases as the temperature and time of the solutionizing heat treatment increases. Therefore, after the aging, size and volume fraction of gamma' precipitates initially increased and then decreased.
引用
收藏
页码:441 / 447
页数:7
相关论文
共 50 条
  • [1] The Effect of Time and Temperature of Solutionizing Heat Treatment on γ′ Characterization in a Ni-Base Superalloy
    Yazdan Shajari
    Seyed Hossein Razavi
    Zahra Sadat Seyedraoufi
    Mohsen Samiee
    Metallography, Microstructure, and Analysis, 2021, 10 : 441 - 447
  • [2] Effect of Rejuvenation Heat Treatment on the Creep Property and Microstructural Evolution of a Ni-Base Superalloy
    Wang, Linning
    Liu, Yuan
    Liang, Jingjing
    APPLIED SCIENCES-BASEL, 2020, 10 (03):
  • [3] Effects of heat treatment on γ′ precipitates and tensile properties of a Ni-base superalloy
    Gai, Yongchao
    Zhang, Rui
    Yang, Jinxia
    Cui, Chuanyong
    Qu, Jinglong
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 842
  • [4] Influence of heat treatment on the microstructure of a unidirectional Ni-base superalloy
    Huang, XB
    Kang, Y
    Zhou, HH
    Zhang, Y
    Hu, ZQ
    MATERIALS LETTERS, 1998, 36 (1-4) : 210 - 213
  • [5] Morphology evolution of γ' precipitates in a powder metallurgy Ni-base superalloy
    Fan, Xianqiang
    Guo, Zhipeng
    Wang, Xiaofeng
    Yang, Jie
    Zou, Jinwen
    MATERIALS CHARACTERIZATION, 2018, 139 : 382 - 389
  • [6] Optimization of the heat treatment of additively manufactured Ni-base superalloy IN718
    Benedikt Diepold
    Nora Vorlaufer
    Steffen Neumeier
    Thomas Gartner
    Mathias G?ken
    International Journal of Minerals Metallurgy and Materials, 2020, 27 (05) : 640 - 648
  • [7] Optimization of the heat treatment of additively manufactured Ni-base superalloy IN718
    Diepold, Benedikt
    Vorlaufer, Nora
    Neumeier, Steffen
    Gartner, Thomas
    Goeken, Mathias
    INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2020, 27 (05) : 640 - 648
  • [8] Optimization of the heat treatment of additively manufactured Ni-base superalloy IN718
    Benedikt Diepold
    Nora Vorlaufer
    Steffen Neumeier
    Thomas Gartner
    Mathias Göken
    International Journal of Minerals, Metallurgy and Materials, 2020, 27 : 640 - 648
  • [9] High temperature strength and failure of the Ni-base superalloy PM 3030
    Nganbe, Michel
    Heilmaier, Martin
    INTERNATIONAL JOURNAL OF PLASTICITY, 2009, 25 (05) : 822 - 837
  • [10] Effect of Solution Heat-Treatment on the Oxidation Resistance of Ni-Base Single-Crystal Superalloy
    Tabata, Chihiro
    Osada, Toshio
    Yokokawa, Tadaharu
    Ikeda, Ayako
    Kawagishi, Kyoko
    Suzuki, Shinsuke
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2023, 54 (12): : 4825 - 4833