A parametric study on effects of pitting corrosion on steel plate's ultimate strength

被引：37

作者：

Feng, Liang ^{[1
]}

He, Jingke ^{[1
]}

Hu, Luocun ^{[1
]}

Shi, Hongda ^{[1
]}

Yu, Changli ^{[2
]}

Wang, Shuqing ^{[1
]}

Yang, Shuo ^{[2
]}

机构：

[1] Ocean Univ China, Coll Engn, Shandong Prov Key Lab Ocean Engn, Qingdao 266100, Peoples R China

[2] Harbin Inst Technol Weihai, Sch Naval Architecture & Ocean Engn, Weihai 264209, Peoples R China

来源：

APPLIED OCEAN RESEARCH | 2020年 / 95卷

关键词：

Ultimate strength; Pitting corrosion; The hull plate; Uniaxial compression; TENSILE-STRENGTH;

D O I：

10.1016/j.apor.2019.102026

中图分类号：

P75 [海洋工程];

学科分类号：

0814 ; 081505 ; 0824 ; 082401 ;

摘要：

Pitting corrosion is commonly found in hull plates, which significantly reduces the structural ultimate strength. In order to address this issue, this work investigates the influence factors of pitting corrosion to the ultimate compressive bearing capacity of the hull plate. Typical factors such as the degree of pitting corrosion (DOP), depth, shape and distributions were considered in a finite element analysis (FEA) model to analyze the influence rules of the pitting parameters on the ultimate strength of the hull plate under axial compressive loads. The FEA simulation results were compared with the experimental results using the same pitting corrosion condition. The comparison demonstrates that the DOP and pitting depth significantly reduce the ultimate strength of the hull plate, and the hull plate's ultimate strength can be attributed to the loss of corrosion volume and pitting distribution. Finally, a formula for evaluating ultimate strength of the hull plate with pitting corrosion damage is proposed.

引用

页数：13

共 27 条

[1] ANFIS method for ultimate strength prediction of unstiffened plates with pitting corrosion
Abdussamie, Nagi
Ojeda, Roberto
Daboos, Mohamed
[J]. SHIPS AND OFFSHORE STRUCTURES, 2018, 13 (05) : 540 - 550
[2] Extreme value analysis for assessing structural reliability of welded offshore steel structures
Chaves, Igor A.
Melchers, Robert E.
[J]. STRUCTURAL SAFETY, 2014, 50 : 9 - 15
[3] Daidola J., 1997, Residual Strength Assessment of Pitted Plate Panels, P17
[4] Experimental and numerical strength assessment of stiffened plates subjected to severe non-uniform corrosion degradation and compressive load
Garbatov, Y.
Tekgoz, M.
Soares, C. Guedes
[J]. SHIPS AND OFFSHORE STRUCTURES, 2017, 12 (04) : 461 - 473
[5] Experimental assessment of tensile strength of corroded steel specimens subjected to sandblast and sandpaper cleaning
Garbatov, Y.
Parunov, J.
Kodvanj, J.
Saad-Eldeen, S.
Soares, C. Guedes
[J]. MARINE STRUCTURES, 2016, 49 : 18 - 30
[6] Tensile strength assessment of corroded small scale specimens
Garbatov, Y.
Soares, C. Guedes
Parunov, J.
Kodvanj, J.
[J]. CORROSION SCIENCE, 2014, 85 : 296 - 303
[7] A methodology for the reassessment of hull-girder ultimate strength of a VLCC tanker based on corrosion model updating
Georgiadis, Dimitris
Samuelides, Manolis
[J]. SHIPS AND OFFSHORE STRUCTURES, 2019, 14 (sup1) : S270 - S280
[8] Ultimate strength assessment of hull structural plate with pitting corrosion damnification under biaxial compression
Huang, Yi
Zhang, Yan
Liu, Gang
Zhang, Qi
[J]. OCEAN ENGINEERING, 2010, 37 (17-18) : 1503 - 1512
[9] Ultimate capacity of rectangular plates with partial depth pits under uniaxial loads
Jiang, Xiaoli
Soares, C. Guedes
[J]. MARINE STRUCTURES, 2012, 26 (01) : 27 - 41
[10] Jiang Xiaoli, 2009, Journal of Wuhan University of Technology (Transportation Science & Engineering), V33, P1167, DOI 10.3963/j.issn.1006-2823.2009.06.037

← 1 2 3 →