Heat pipe with PCM for electronic cooling

被引：231
|
作者：
Weng, Ying-Che [1 ]
Cho, Hung-Pin [1 ]
Chang, Chih-Chung [1 ]
Chen, Sih-Li [1 ]
机构：
[1] Natl Taiwan Univ, Dept Mech Engn, Taipei 10617, Taiwan
来源：
APPLIED ENERGY | 2011年 / 88卷 / 05期
关键词：
Heat pipe; Electronic cooling; Phase change material; PHASE-CHANGE MATERIALS; ENERGY STORAGE DEVICE; THERMAL MANAGEMENT; TRANSFER ENHANCEMENT; PERFORMANCE; COMPONENTS;
D O I：
10.1016/j.apenergy.2010.12.004
中图分类号：
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号：
0807 ; 0820 ;
摘要：
This article experimentally investigates the thermal performances of a heat pipe with phase change material for electronic cooling. The adiabatic section of heat pipe is covered by a storage container with phase change material (PCM), which can store and release thermal energy depending upon the heating powers of evaporator and fan speeds of condenser. Experimental investigations are conducted to obtain the system temperature distributions from the charge, discharge and simultaneous charge/discharge performance tests. The parameters in this study include three kinds of PCMs, different filling PCM volumes, fan speeds, and heating powers in the PCM cooling module. The cooling module with tricosane as PCM can save 46% of the fan power consumption compared with the traditional heat pipe. (C) 2010 Elsevier Ltd. All rights reserved.
引用
收藏
页码：1825 / 1833
页数：9
相关论文
共 50 条
  • [31] Numerical Investigation of a Pulsating Heat Pipe Using Different Nanofluids for Electronic Cooling
    P. Venkataramana
    Perumalla Vijaya Kumar
    B. Balakrishna
    Journal of The Institution of Engineers (India): Series C, 2025, 106 (1) : 143 - 155
  • [32] Experimental research of a thermoelectric cooling system integrated with gravity assistant heat pipe for cooling electronic devices
    Sun, Xiaoqin
    Yang, Yanjia
    Zhang, Hongliang
    Si, Huiwei
    Huang, Liang
    Liao, Shuguang
    Gu, Xiaosong
    8TH INTERNATIONAL CONFERENCE ON APPLIED ENERGY (ICAE2016), 2017, 105 : 4909 - 4914
  • [33] Modeling the heat transfer in a PCM cooling vest
    Yazdi, M. Mokhtari
    Sheikhzadeh, M.
    Borhani, S.
    JOURNAL OF THE TEXTILE INSTITUTE, 2015, 106 (09) : 1003 - 1012
  • [34] Experimental Investigations of Phase Change Materials (PCM) for Electronic Cooling Application Using Heat Sinks
    Shajahan, Mohamed Iqbal
    Mallela, Gandhi
    Lenka, Bhaskar Chandra
    Aradhyula, Vinay Kumar
    Panneerselvam, Padmanathan
    ADVANCES IN COMPUTATIONAL HEAT AND MASS TRANSFER, ICCHMT 2023, VOL 2, 2024, : 351 - 361
  • [35] EXPERIMENTAL INVESTIGATIONS ON THERMAL PERFORMANCE OF PCM BASED HEAT SINK FOR PASSIVE COOLING OF ELECTRONIC COMPONENTS
    Kothari, Rohit
    Mahalkar, Pawan
    Sahu, Santosh K.
    Kundaiwal, Shailesh I.
    PROCEEDINGS OF THE ASME 16TH INTERNATIONAL CONFERENCE ON NANOCHANNELS, MICROCHANNELS, AND MINICHANNELS, 2018, 2016,
  • [36] Experimental analysis of a heat sink for electronic chipset cooling using a nano improved PCM (NIPCM)
    Manoj Kumar P.
    Saminathan R.
    Sumayli A.
    Mittal M.
    Abishek A.S.
    Atharsh Kumaar A.S.
    Reddy T.D.K.
    Rinawa M.L.
    Materials Today: Proceedings, 2022, 56 : 1527 - 1531
  • [37] Experimental comparison between different configurations of PCM based heat sinks for cooling electronic components
    Gharbi, Salma
    Harmand, Souad
    Ben Jabrallah, Sadok
    APPLIED THERMAL ENGINEERING, 2015, 87 : 454 - 462
  • [38] Conjugate heat transfer analysis of PCM suspensions in a circular pipe subjected to external cooling convection: Parameter effects
    Ho, C. J.
    Wang, Z. C.
    Chen, R. H.
    Lai, Chi-Ming
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2020, 162
  • [39] PCM assisted heat pipe cooling system for the thermal management of an LTO cell for high-current profiles
    Behi, Hamidreza
    Karimi, Danial
    Gandoman, Foad Heidari
    Akbarzadeh, Mohsen
    Khaleghi, Sahar
    Kalogiannis, Theodoros
    Hosen, Md Sazzad
    Jaguemont, Joris
    Van Mierlo, Joeri
    Berecibar, Maitane
    CASE STUDIES IN THERMAL ENGINEERING, 2021, 25
  • [40] Performance of beeswax phase change material (PCM) and heat pipe as passive battery cooling system for electric vehicles
    Putra, Nandy
    Sandi, Adjie Fahrizal
    Ariantara, Bambang
    Abdullah, Nasruddin
    Mahlia, Teuku Meurah Indra
    CASE STUDIES IN THERMAL ENGINEERING, 2020, 21 (21)
12345