Effect of oxygen boost diffusion treatment on fatigue behavior of Ti-4Al-2V alloy

被引：17

作者：

Omidbakhsh, F. ^{[1
]}

Ebrahimi, A. R. ^{[1
]}

Mousavi, S. H. ^{[1
]}

Khosroshahi, R. A. ^{[1
]}

Nazarpour, S. ^{[2
]}

机构：

[1] Sahand Univ Technol, Dept Mat Engn, Tabriz, Iran

[2] Univ Barcelona, Dept Elect, Barcelona 08028, Spain

来源：

SURFACE & COATINGS TECHNOLOGY | 2011年 / 205卷 / 8-9期

关键词：

Oxygen boost diffusion; Residual compressive stress; Fatigue crack closure; Ti-4Al-2V; DLC COATINGS; TITANIUM; OXIDATION; PROPAGATION; RESISTANCE; MORPHOLOGY; TI6AL4V; STRESS;

D O I：

10.1016/j.surfcoat.2010.11.004

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

An attempt has been made to determine the influence of oxygen boost diffusion (OBD) treatment on the fatigue behavior of Ti-4Al-2V alloy. In order to study the effect of OBD treatment, specimens were thermally oxidized at 450 degrees C in air for 2 h. Pre oxidized samples were put in the vacuum furnace (1 x 10(-3) Pa) at 850 degrees C for 7, 14, and 21 h. Rotary bending fatigue tests were performed on specimens before and after OBD treatments. The results revealed that OBD treatment led the fatigue endurance limit to be increased up to 85%. X-ray diffraction studies revealed that OBD treatment gave rise to large lattice expansion and high amount of residual compressive stresses, as result of dissolving oxygen atoms as interstitial in the titanium lattice. It is believed that the fatigue endurance limit improvement is mainly due to the residual compressive stress (RCS) filed and fatigue crack closure mechanisms. (C) 2010 Elsevier B.V. All rights reserved.

引用

页码：2954 / 2963

页数：10

共 50 条

[41] Roller working effect on fatigue strength of Ti-Al-4V alloy
Son, SY
Nishida, S
Hattori, N
Jeong, WT
ADVANCES IN FRACTURE AND FAILURE PREVENTION, PTS 1 AND 2, 2004, 261-263 : 1269 - 1274
[42] Effect of ceramic conversion surface treatment on fatigue properties of Ti6Al4V alloy
Li, C. X.
Horspool, D.
Dong, H.
INTERNATIONAL JOURNAL OF FATIGUE, 2007, 29 (12) : 2273 - 2280
[43] Effect of surface treatment on the fatigue strength of additive manufactured Ti6Al4V alloy
Navarro, Carlos
Vazquez, Jesus
Dominguez, Jaime
Perinan, Antonio
Herrera Garcia, Marta
Lasagni, Fernando
Bernarding, Simon
Slawik, Sebastian
Muecklich, Frank
Boby, Francisco
Hackel, Lloyd
FRATTURA ED INTEGRITA STRUTTURALE, 2020, 14 (53): : 337 - 344
[44] Effect of Heat Treatment on the Electrochemical and Mechanical Behavior of the Ti6Al4V Alloy
Mercedes Paulina Chávez-Díaz
María Lorenza Escudero-Rincón
Jesús Chao
Elsa Miriam Arce-Estrada
Román Cabrera-Sierra
Metallurgical and Materials Transactions A, 2021, 52 : 3570 - 3584
[45] Effect of heat treatment on corrosion behavior of Ti-6Al-4V alloy weldments
Karimzadeh, F.
Heidarbeigy, M.
Saatchi, A.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2008, 206 (1-3) : 388 - 394
[46] Effect of Heat Treatment on the Electrochemical and Mechanical Behavior of the Ti6Al4V Alloy
Chavez-Diaz, Mercedes Paulina
Escudero-Rincon, Maria Lorenza
Chao, Jesus
Arce-Estrada, Elsa Miriam
Cabrera-Sierra, Roman
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2021, 52 (08): : 3570 - 3584
[47] Very High Cycle Fatigue Behavior of Ti-6Al-4V Alloy
Yan, Nu
Zhu, Xin
Han, Donggui
Liu, Fang
Yu, Yonghua
PROCEEDINGS OF THE 4TH ANNUAL INTERNATIONAL CONFERENCE ON MATERIAL ENGINEERING AND APPLICATION (ICMEA 2017), 2017, 146 : 129 - 132
[48] Fatigue behavior of plasma surface modified Ti-6Al-4V alloy
Li, XY
Wu, PQ
Tang, B
Celis, JP
VACUUM, 2005, 79 (1-2) : 52 - 57
[49] HIGH-CYCLE FATIGUE BEHAVIOR OF TI-6AL-4V ALLOY
STEELE, RK
MCEVILY, AJ
ENGINEERING FRACTURE MECHANICS, 1976, 8 (01) : 31 - 37
[50] Fatigue behavior of Ti-6Al-4V alloy in vacuum and at low temperature
Zuo, J. H.
Wang, Z. G.
Han, E. H.
STRUCTURAL INTEGRITY AND FAILURE, 2008, 41-42 : 83 - +

← 1 2 3 4 5 →