Diffusionally accommodated interfacial sliding in metalsilicon systems

被引:27
作者
Peterson, KA
Dutta, I [1 ]
Chen, MW
机构
[1] USN, Postgrad Sch, Dept Engn Mech, Ctr Mat Sci & Engn, Monterey, CA 93943 USA
[2] Johns Hopkins Univ, Dept Mech Engn, Baltimore, MD 21218 USA
基金
美国国家科学基金会;
关键词
interfacial sliding; diffusional creep; threshold stress; interfacial topography;
D O I
10.1016/S1359-6454(03)00088-0
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The kinetics and mechanism of diffusionally accommodated interfacial sliding (interfacial creep) under far-field shear and normal stresses was studied, based on diffusion-bonded Al-Si-Al sandwich specimens. A previously developed interfacial creep law [Funn and Dutta, Acta Mater 1999; 47: 149], which proposed that interfaces may slide via interface-diffusion controlled diffusional creep, was experimentally validated by carrying out a systematic parametric study. In agreement with the model, the Si-Al interfaces slid via diffusional creep (n = 1) under the influence of an effective shear stress, which depends on the far-field shear and normal stresses, as well as the interfacial topography. Compressive stresses acting normal to the interface lowered the effective shear stress, resulting in a threshold effect, thus reducing the sliding rate. The rate of sliding was controlled by diffusional mass transport through a thin amorphous, O-rich interfacial layer, under the influence of local interfacial stress gradients, which arose due to the topological features of the interface. Instances of interfacial sliding in the absence of interfacial de-cohesion, which have been noted in composites, thin-film systems, etc., may be explained by the present mechanism, which also offers an alternative rationalization of threshold behavior during diffusional flow (besides interface-reaction control). (C) 2003 Acta Materialia Inc. Published by Elsevier Science Ltd. All rights reserved.
引用
收藏
页码:2831 / 2846
页数:16
相关论文
共 36 条
[1]  
[Anonymous], 2013, Smithells Met. Ref. B, DOI DOI 10.1016/C2009-0-25363-3
[2]   INTERFACE CONTROLLED DIFFUSIONAL CREEP [J].
ARZT, E ;
ASHBY, MF ;
VERRALL, RA .
ACTA METALLURGICA, 1983, 31 (12) :1977-1989
[3]  
Ashby M.F., 1982, DEFORMATION MECH MAP
[4]   ON INTERFACE-REACTION CONTROL OF NABARRO-HERRING CREEP AND SINTERING [J].
ASHBY, MF .
SCRIPTA METALLURGICA, 1969, 3 (11) :837-&
[5]   DEFORMATION-INDUCED NANOCRYSTAL FORMATION IN SHEAR BANDS OF AMORPHOUS-ALLOYS [J].
CHEN, H ;
HE, Y ;
SHIFLET, GJ ;
POON, SJ .
NATURE, 1994, 367 (6463) :541-543
[6]   Atomic force microscopy study of plastic deformation and interfacial sliding in Al thin film: Si substrate systems due to thermal cycling [J].
Chen, MW ;
Dutta, I .
APPLIED PHYSICS LETTERS, 2000, 77 (26) :4298-4300
[7]  
David Kingery W., 1976, INTRO CERAMICS, V17
[8]   A MICROSTRUCTURAL STUDY OF CREEP IN SHORT-FIBER-REINFORCED ALUMINUM-ALLOYS [J].
DLOUHY, A ;
MERK, N ;
EGGELER, G .
ACTA METALLURGICA ET MATERIALIA, 1993, 41 (11) :3245-3256
[9]   Plastic deformation and interfacial sliding in Al and Cu thin film: Si substrate systems due to thermal cycling [J].
Dutta, I ;
Chen, MW ;
Peterson, K ;
Shultz, T .
JOURNAL OF ELECTRONIC MATERIALS, 2001, 30 (12) :1537-1548
[10]   Role of interfacial and matrix creep during thermal cycling of continuous fiber reinforced metal-matrix composites [J].
Dutta, I .
ACTA MATERIALIA, 2000, 48 (05) :1055-1074