Production of the AA2196-TiB2 MMCs via PM Technology

被引：4

作者：

Tan, Engin ^{[1
]}

Kaplan, Yavuz ^{[2
]}

Ada, Hakan ^{[3
]}

Aksoz, Sinan ^{[1
]}

机构：

[1] Pamukkale Univ, Technol Fac, Dept Met & Mat Engn, Kinikli Campus, Denizli, Turkey

[2] Pamukkale Univ, Technol Fac, Dept Mech & Mfg Engn, Kinikli Campus, Denizli, Turkey

[3] Kastamonu Univ, Engn & Architecture Fac, Dept Mech Engn, Kastamonu, Turkey

来源：

LIGHT METALS 2019 | 2019年

关键词：

AA2196-TiB2; MMCs; Powder metallurgy; SEM; FASTMAP; ALUMINUM; AEROSPACE; SPACE;

D O I：

10.1007/978-3-030-05864-7_21

中图分类号：

O646 [电化学、电解、磁化学];

学科分类号：

081704 ;

摘要：

In this study, metal matrix composite (MMC) materials were produced via powder metallurgy (PM) technology. Main matrix was obtained with AA2196 (Al-Li Alloy) and TiB2 was used as reinforcement materials. In study; TiB2 reinforcements ratio were chosen between 5 and 15%wt. The metallographic investigation was realized with; SEM, EDS, FASTMAP, Optical Microscope analyzing techniques. Hardness values were obtained with HV1. In the study, the reinforcements could be distributed in main matrix homogeneously, via PM technique. The MMCs hardness values increased with the edition of TiB2 reinforcement.

引用

收藏

页码：153 / 157

页数：5

相关论文

共 9 条

[1] Effects of Ageing and Cryo-ageing Treatments on Microstructure and Hardness Properties of AA2014-SiC MMCs [J].

Aksoz, Sinan ;

Bostan, Bulent .

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2018, 71 (08) :2035-2042

[2] Effect of T7 heat treatment on the dry sliding friction and wear properties of the SiC-reinforced AA 2014 aluminium matrix composites produced by vacuum infiltration [J].

Aksoz, Sinan ;

Bican, Osman ;

Calin, Recep ;

Bostan, Bulent .

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2014, 228 (03) :312-319

[3]

Aksöz S, 2012, J FAC ENG ARCHIT GAZ, V27, P109

[4] High-strength PM aluminium by milling in ammonia gas and sintering [J].

Cintas, J ;

Cuevas, FG ;

Montes, JM ;

Herrera, EJ .

SCRIPTA MATERIALIA, 2005, 53 (10) :1165-1170

[5] Springback analysis of Z & T-section 2196-T8511 and 2099-T83 Al-Li alloys extrusions in displacement controlled cold stretch bending [J].

Liu, Tianjiao ;

Wang, Yongjun ;

Wu, Jianjun ;

Xia, Xiaojiao ;

Wang, Junbiao ;

Wang, Wei ;

Wang, Shunhong .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2015, 225 :295-309

[6] Fabrication methods to manufacture isotropic Al-Li alloys and products for space and aerospace applications [J].

Rioja, RJ .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1998, 257 (01) :100-107

[7] The Evolution of Al-Li Base Products for Aerospace and Space Applications [J].

Rioja, Roberto J. ;

Liu, John .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2012, 43A (09) :3325-3337

[8] The effect of the atmosphere and the role of pore filling on the sintering of aluminium [J].

Schaffer, GB ;

Hall, BJ ;

Bonner, SJ ;

Huo, SH ;

Sercombe, TB .

ACTA MATERIALIA, 2006, 54 (01) :131-138

[9] The effect of cryogenic treatment on ageing behaviour of B4C reinforced 7075 aluminium composite [J].

Taskesen, A. ;

Aksoz, S. ;

Ozdemir, A. T. .

KOVOVE MATERIALY-METALLIC MATERIALS, 2017, 55 (01) :57-67