Influence of nickel boride addition on sintering behaviour and mechanical properties of TiC-Ni based cermets

被引：29

作者：

Acharya, Suvalaxmi ^{[1
]}

Debata, M. ^{[1
]}

Acharya, T. S. ^{[1
]}

Acharya, P. P. ^{[1
]}

Singh, S. K. ^{[1
]}

机构：

[1] CSIR, Inst Minerals & Mat Technol, Adv Mat Technol Dept, Bhubaneswar 751013, Odisha, India

来源：

JOURNAL OF ALLOYS AND COMPOUNDS | 2016年 / 685卷

关键词：

TiC-Ni-NiB cermet; Powder metallurgy; CTE; FESEM; Elastic modulus; Hardness; METAL-MATRIX COMPOSITES; THERMAL-EXPANSION; MICROSTRUCTURE; POWDERS; WETTABILITY; TOOLS; TI(C;

D O I：

10.1016/j.jallcom.2016.06.122

中图分类号：

O64 [物理化学（理论化学）、化学物理学];

学科分类号：

070304 ; 081704 ;

摘要：

TiC-Ni based cermets were prepared by vacuum sintering at 1200 degrees C, 1300 degrees C and 1400 degrees C. NiB (0, 10, 20 wt%) was added to improve sintering activity by creating a liquid phase and enhance the densification. The effects of NiB content on density, microstructure, hardness, elastic modulus, fracture toughness, and thermal expansion were studied. Density, micro hardness, elastic modulus, and fracture toughness, of the composite were increased by the addition of 10 wt% NiB. The 1400 degrees C sintered sample with 10 wt% NiB resulted in maximum densification with 97% of theoretical density. The 1400 degrees C sintered TiC-10Ni-10NiB showed better mechanical properties with elastic modulus of 470 GPa, hardness of 2759 HV and fracture toughness 8.98 MPa m(1/2), all better than that of TiC-20Ni sintered at same condition. (C) 2016 Elsevier B.V. All rights reserved.

引用

页码：905 / 912

页数：8

共 32 条

[1]

Baker H., 1992, ALLOY PHASE DIAGRAMS, V3, P2

[2] Microstructure and mechanical properties of TiC-TiN based cermets for tools application [J].

Cardinal, S. ;

Malchere, A. ;

Garnier, V. ;

Fantozzi, G. .

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2009, 27 (03) :521-527

[3] Microstructure and mechanical properties of ultrafine Ti(CN)-based cermets fabricated from nano/submicron starting powders [J].

Chao, S ;

Liu, N ;

Yuan, YP ;

Han, CL ;

Xu, YD ;

Shi, M ;

Feng, JP .

CERAMICS INTERNATIONAL, 2005, 31 (06) :851-862

[4] Fundamentals of liquid phase sintering for modern cermets and functionally graded cemented carbonitrides (FGCC) [J].

Chen, LM ;

Lengauer, W ;

Ettmayer, P ;

Dreyer, K ;

Daub, HW ;

Kassel, D .

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2000, 18 (06) :307-322

[5] Preparation of ultrafine TiC-Ni cermet powders by mechanical alloying [J].

Choi, CJ .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2000, 104 (1-2) :127-132

[6]

Debata M., 2004, J MATER SCI, V39, P2339

[7] Thermal expansion behavior of particulate metal-matrix composites [J].

Elomari, S ;

Skibo, MD ;

Sundarrajan, A ;

Richards, H .

COMPOSITES SCIENCE AND TECHNOLOGY, 1998, 58 (3-4) :369-376

[8] HARDMETALS AND CERMETS [J].

ETTMAYER, P .

ANNUAL REVIEW OF MATERIALS SCIENCE, 1989, 19 :145-164

[9]

German R., 1985, LIQUID PHASE SINTERI

[10]

Gülsoy HÖ, 2005, SCRIPTA MATER, V52, P187, DOI [10.1016/j.sciptamat.2004.09.032, 10.1016/j.scriptamat.2004.09.032]

← 1 2 3 4 →