A simple method to synthesize Ba0.6Sr0.4TiO3 nano-powders through high-energy ball-milling

被引：18

作者：

Liu, Cheng ^{[1
]}

Liu, Peng ^{[1
]}

Lu, Xiao-gang ^{[2
]}

Gao, Chang-jie ^{[2
]}

Zhu, Gang-qiang ^{[1
]}

Chen, Xiao-ming ^{[1
]}

机构：

[1] Shaanxi Normal Univ, Coll Phys & Informat Technol, Xian 710062, Peoples R China

[2] China Ordnance Ind Grp Corp, Inst 206, Xian 710100, Peoples R China

来源：

POWDER TECHNOLOGY | 2011年 / 212卷 / 01期

基金：

中国国家自然科学基金;

关键词：

BST; Powder preparation; Thermal analysis; Microstructure; BARIUM-STRONTIUM-TITANATE; LOW-TEMPERATURE SYNTHESIS; DIELECTRIC-PROPERTIES; CERAMIC COMPOSITES; MICROSTRUCTURE; NANOPOWDERS;

D O I：

10.1016/j.powtec.2011.05.010

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

In this study, we fabricated Ba0.6Sr0.4TiO3 (BST) powders via a high-energy ball-milling (HEBM) method. The processing parameters were optimized to obtain an optimum synthesis condition. BST nano-powders (with a mean grain size of 475 nm) were derived from the precursor milled at 400/800 rpm for 5 h and calcined at 1000 degrees C for 2 h. This synthesis temperature was much lower than that required by traditional solid state reaction. It was suggested that HEBM is a simple and practical route to synthesize BST nano-powders. (C) 2011 Elsevier B.V. All rights reserved.

引用

页码：299 / 302

页数：4

共 26 条

[1] Effect of mechanical milling on solid state formation of BaTiO3 from BaCO3-TiO2 (rutile) mixtures [J].

Berbenni, V ;

Marini, A ;

Bruni, G .

THERMOCHIMICA ACTA, 2001, 374 (02) :151-158

[2] Microwave dielectric properties of glass-ceramic composites for low temperature co-firable ceramics [J].

Cheng, CC ;

Hsieh, TE ;

Lin, IN .

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2003, 23 (14) :2553-2558

[3] Processing and cation redistribution of MnZn ferrites via high-energy ball milling [J].

Fatemi, DJ ;

Harris, VG ;

Browning, VM ;

Kirkland, JP .

JOURNAL OF APPLIED PHYSICS, 1998, 83 (11) :6867-6869

[4] Low-temperature synthesis of Mg4Nb2O9 nanopowders by high-energy ball-milling method [J].

Fu, Zhi-Fen ;

Liu, Peng ;

Chen, Xiao-Ming ;

Ma, Jian-Li ;

Zhang, Huai-Wu .

JOURNAL OF ALLOYS AND COMPOUNDS, 2010, 493 (1-2) :441-444

[5] Do we really need ferroelectrics in paraelectric phase only in electrically controlled microwave devices? [J].

Gevorgian, SS ;

Kollberg, EL .

IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES, 2001, 49 (11) :2117-2124

[6] Ba0.7Sr0.3powders with B2O3 additive prepared by the sol-gel method for use as-microwave material [J].

Hu, T ;

Jantunen, H ;

Uusimäki, A ;

Leppävuori, S .

MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING, 2002, 5 (2-3) :215-221

[7] Design aspects of microwave components with LTCC technique [J].

Jantunen, H ;

Kangasvieri, T ;

Vähäkangas, J ;

Leppävuori, S .

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2003, 23 (14) :2541-2548

[8] Microstructure and dielectric properties of barium-strontium titanate with a functionally graded structure [J].

Jeon, JH ;

Hahn, YD ;

Kim, HD .

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2001, 21 (10-11) :1653-1656

[9] Synthesis of star shaped Ba1-xSrTiO3 (BST) powders [J].

Khollam, YB ;

Potdar, HS ;

Deshpande, SB ;

Gaikwad, AB .

MATERIALS CHEMISTRY AND PHYSICS, 2006, 97 (2-3) :295-300

[10] Overview paper no. 2. The synthesis and structure of nanocrystalline materials produced by mechanical attrition. A review [J].

Koch, C.C. .

Nanostructured Materials, 1993, 2 (02)

← 1 2 3 →