Effects of sintering temperature on the internal barrier layer capacitor (IBLC) structure in CaCu3Ti4O12 (CCTO) ceramics

被引：316

作者：

Schmidt, Rainer ^{[1
]}

Stennett, Martin C. ^{[2
]}

Hyatt, Neil C. ^{[2
]}

Pokorny, Jan ^{[2
,3
]}

Prado-Gonjal, Jesus ^{[4
]}

Li, Ming ^{[2
]}

Sinclair, Derek C. ^{[2
]}

机构：

[1] Univ Complutense Madrid, Fac Ciencias Fis, GFMC, Dpt Fis Aplicada 3, E-28040 Madrid, Spain

[2] Univ Sheffield, Sheffield S1 3JD, S Yorkshire, England

[3] Acad Sci Czech Republic, Inst Phys, Prague 18221 8, Czech Republic

[4] Univ Complutense Madrid, Fac Ciencias Quim, Dpt Quim Inorgan, E-28040 Madrid, Spain

来源：

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY | 2012年 / 32卷 / 12期

基金：

英国工程与自然科学研究理事会;

关键词：

Grain boundaries; Dielectric properties; Chemical properties; Perovskites; Capacitors; GIANT DIELECTRIC-CONSTANT; SILICATE-GLASSES; COPPER-TITANATE; XANES SPECTRA; COORDINATION; SPECIATION; CHEMISTRY; OXIDE;

D O I：

10.1016/j.jeurceramsoc.2012.03.040

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The formation of the internal barrier layer capacitor (IBLC) structure in CaCu3Ti4O12 (CCTO) ceramics was found to be facilitated by the ceramic heat treatment. Electrically insulating grain boundary (GB) and semi-conducting grain interior areas were characterized by impedance spectroscopy to monitor the evolution of the IBLC structure with increasing sintering temperature T-s (975-1100 degrees C). The intrinsic bulk and GB permittivity increased by factors of approximate to 2 and 300, respectively and the bulk resistivity decreased by a factor of approximate to 10(3). These trends were accompanied by increased Cu segregation from the CCTO ceramics as detected by scanning electron microscopy and quantitative energy dispersive analysis of X-rays. The chemical changes due to possible Cu-loss in CCTO ceramics with increasing T-s are small and beyond the detection limits of X-ray absorption spectroscopy near Cu and Ti K-edges and Raman Spectroscopy. (c) 2012 Elsevier Ltd. All rights reserved.

引用

页码：3313 / 3323

页数：11

共 42 条

[1] Influence of processing conditions on the electrical properties of CaCu3Ti4O12 ceramics [J].

Adams, T. B. ;

Sinclair, D. C. ;

West, A. R. .

JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2006, 89 (10) :3129-3135

[2] Characterization of grain boundary impedances in fine- and coarse-grained CaCu3Ti4O12 ceramics -: art. no. 094124 [J].

Adams, TB ;

Sinclair, DC ;

West, AR .

PHYSICAL REVIEW B, 2006, 73 (09)

[3]

Adams TB, 2002, ADV MATER, V14, P1321, DOI 10.1002/1521-4095(20020916)14:18<1321::AID-ADMA1321>3.0.CO

[4]

2-P

[5] Structural and electrical study of CaCu3Ti4O12 (CCTO) obtained in a new ceramic procedure [J].

Almeida, A. F. L. ;

Fechine, P. B. A. ;

Graca, M. P. F. ;

Valente, M. A. ;

Sombra, A. S. B. .

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2009, 20 (02) :163-170

[6] Roman coloured and opaque glass: a chemical and spectroscopic study [J].

Arletti, R ;

Dalconi, MC ;

Quartieri, S ;

Triscari, M ;

Vezzalini, G .

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 2006, 83 (02) :239-245

[7]

Barsoukov E, 2005, IMPEDANCE SPECTROSCOPY: THEORY, EXPERIMENT, AND APPLICATIONS, 2ND EDITION, pXII

[8] The effect of processing on the giant dielectric properties of CaCu3Ti4O12 [J].

Bender, BA ;

Pan, MJ .

MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY, 2005, 117 (03) :339-347

[9] Role of doping and CuO segregation in improving the giant permittivity of CaCU3Ti4O12 [J].

Capsoni, D ;

Bini, M ;

Massarotti, V ;

Chiodelli, G ;

Mozzati, MC ;

Azzoni, CB .

JOURNAL OF SOLID STATE CHEMISTRY, 2004, 177 (12) :4494-4500

[10] A pre-edge analysis of Mn K-edge XANES spectra to help determine the speciation of manganese in minerals and glasses [J].

Chalmin, E. ;

Farges, F. ;

Brown, G. E., Jr. .

CONTRIBUTIONS TO MINERALOGY AND PETROLOGY, 2009, 157 (01) :111-126

← 1 2 3 4 5 →