New technology and practice of dust pollution control with foam jet in underground mines

被引:4
作者
Lu, Xin-Xiao [1 ,2 ,3 ]
Zhu, Hong-Qing [1 ]
Wang, De-Ming [4 ]
机构
[1] China Univ Min & Technol Beijing, State Key Lab Coal Resources & Safe Min, Beijing, Peoples R China
[2] Henan Polytech Univ, State Key Lab Cultivat Base Gas Geol & Gas Contro, Jiaozuo, Peoples R China
[3] Univ Sci & Technol China, State Key Lab Fire Sci, Hefei, Anhui, Peoples R China
[4] China Univ Min & Technol, Key Lab Gas & Fire Control Coal Mines, Minist Educ, Xuzhou, Jiangsu, Peoples R China
来源
JOURNAL OF ENVIRONMENTAL SCIENCE AND HEALTH PART A-TOXIC/HAZARDOUS SUBSTANCES & ENVIRONMENTAL ENGINEERING | 2019年 / 54卷 / 01期
基金
中国国家自然科学基金;
关键词
Jet; cavitation; pressure loss; foam; dust suppression; SUPPRESSION; PERFORMANCE; CAVITATION; PUMP; DESIGN;
D O I
10.1080/10934529.2018.1507220
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
Foam is used as an efficient means of dust suppression in underground coal mines. The poor performance of conventional adding device of foaming agent restricts its wide application. The objective of this study is to propose and investigate a new parallel jet adding device (PJAD). Experimental results show that PJAD requires a greater water flow to produce negative pressure than the single stage jet adding device (SJAD) and is harder to generate cavitation. PJAD consumes a less pressure loss than SJAD and realizes any adding proportion below 1%, which is especially suitable for precision addition of foaming agent. A foaming system used for dust suppression is put forward with PJAD adding foaming agent. Field application indicates that foam achieves a far better dust suppression effect than the roadheader water spraying, and the foam cost is significantly reduced due to the low adding proportion of foaming agent. The marked dust suppression effect makes us believe that the proposed PJAD will greatly promote the large-scale application of foam technology used for dust suppression in underground coal mines.
引用
收藏
页码:39 / 47
页数:9
相关论文
共 31 条
[1]   Performance and image analysis of a cavitating process in a small type venturi [J].
Abdulaziz, A. M. .
EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2014, 53 :40-48
[2]   Air dispersion of heavy metals in the vicinity of the As-Sb-Tl abounded mine and responsiveness of moss as a biomonitoring media in small-scale investigations [J].
Baceva, Katerina ;
Stafilov, Trajce ;
Sajn, Robert ;
Tanaselia, Claudiu .
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH, 2013, 20 (12) :8763-8779
[3]  
Bonnington S. T, 1976, CRANFIELD, V110, P22
[4]   Estimating uncertainty of measurements for cavitation detection in a centrifugal pump [J].
Cernetic, Jan ;
Cudina, Mirko .
MEASUREMENT, 2011, 44 (07) :1293-1299
[5]  
Colinet J. F., 2003, BEST PRACTICES DUST
[6]   JET PUMP CAVITATION [J].
CUNNINGHAM, RG ;
HANSEN, AG ;
NA, TY .
JOURNAL OF BASIC ENGINEERING, 1970, 92 (03) :483-+
[7]   Relationship between cavitation structures and cavitation damage [J].
Dular, M ;
Bachert, B ;
Stoffel, B ;
Sirok, B .
WEAR, 2004, 257 (11) :1176-1184
[8]  
Kissell F.N., 2003, Handbook for dust control in mining
[9]   JET PUMP CAVITATION WITH AMBIENT AND HIGH-TEMPERATURE WATER [J].
KUDIRKA, AA ;
DECOSTER, MA .
JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, 1979, 101 (01) :93-99
[10]  
Laurito AW., 1987, EVALUATION AIR SPRAY