Influence of synthesis temperatures on the crystalline grain growth and morphology of lanthanum magnesium hexaaluminate

被引:14
作者
Sun, Junbin [1 ]
Wang, Jinshuang [1 ]
Huang, Wenzhi [2 ]
Hui, Yu [3 ]
Zhou, Xin [1 ]
Li, Lifen [1 ]
Jiang, Jianing [1 ]
Deng, Longhui [1 ]
Niu, Yunya [1 ]
Dong, Shujuan [1 ]
Cao, Xueqiang [1 ]
机构
[1] Wuhan Univ Technol, State Key Lab Silicate Mat Architectures, Wuhan 430070, Hubei, Peoples R China
[2] Natl Univ Def Technol, Sci & Technol Adv Ceram Fibers & Composites Lab, Changsha 410073, Hunan, Peoples R China
[3] Shenyang Acad Environm Sci, Atmospher Environm Res Ctr, Shenyang 110016, Liaoning, Peoples R China
基金
中国国家自然科学基金;
关键词
Hexaaluminate; Crystalline grain growth; Crystal morphology; THERMAL BARRIER COATINGS; PHASE-SINTERED ALUMINA; CALCIUM HEXALUMINATE; CERAMIC COMPOSITES; ABNORMAL GRAINS; TRANSFORMATION; ZIRCONIA; BEHAVIOR; GD; ND;
D O I
10.1016/j.jre.2017.05.012
中图分类号
O69 [应用化学];
学科分类号
081704 ;
摘要
Lanthanum magnesium hexaaluminate (LaMgAl11O19, LMA) was prepared at different temperatures by solid-state reaction. Phase compositions and crystal morphologies of specimens synthesized at different temperatures were investigated using X-ray diffraction (XRD), scanning electron microscopy (SEM). It was observed that the crystalline grain size of LMA was not only dependent on the preparation temperature but also on its powder morphology. In the temperature range of 1300-1550 degrees C, LMA showed platelet grain and the average crystalline grain size increases with the increase in temperature. At 1600 degrees C, if the powder was sintered for two times, the equiaxed grain could be found with the decrease in grain space, resulting in the reduction of the crystalline grain size. Styles of specimens (powder or disk) might have no obvious influence on morphologies and sizes of LMA crystalline grains which were synthesized with the well-dispersed raw material mixtures. The synthesis temperature played a key role in influencing the free space for the formation and growth of crystalline grains. (c) 2017 Chinese Society of Rare Earths. Published by Elsevier B.V. All rights reserved.
引用
收藏
页码:1226 / 1232
页数:7
相关论文
共 29 条
[1]   Control of calcium hexaluminate grain morphology in in-situ toughened ceramic composites [J].
An, L ;
Chan, HM ;
Soni, KK .
JOURNAL OF MATERIALS SCIENCE, 1996, 31 (12) :3223-3229
[2]   Thermal barrier coatings for aircraft turbine airfoils :: thermal challenge and materials [J].
Arnault, V ;
Mévrel, R ;
Alpérine, S ;
Jaslier, Y .
REVUE DE METALLURGIE-CAHIERS D INFORMATIONS TECHNIQUES, 1999, 96 (05) :585-597
[3]   Phase transformation and wear studies of plasma sprayed yttria stabilized zirconia coatings containing various mol% of yttria [J].
Aruna, S. T. ;
Balaji, N. ;
Rajam, K. S. .
MATERIALS CHARACTERIZATION, 2011, 62 (07) :697-705
[4]   Failure of the plasma-sprayed coating of lanthanum hexaluminate [J].
Cao, X. Q. ;
Zhang, Y. F. ;
Zhang, J. F. ;
Zhong, X. H. ;
Wang, Y. ;
Ma, H. M. ;
Xu, Z. H. ;
He, L. M. ;
Lu, F. .
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2008, 28 (10) :1979-1986
[5]   Ceramic materials for thermal barrier coatings [J].
Cao, XQ ;
Vassen, R ;
Stoever, D .
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2004, 24 (01) :1-10
[6]   Hot corrosion behaviour of plasma sprayed YSZ/LaMgAl11O19 composite coatings in molten sulfate-vanadate salt [J].
Chen, Xiaolong ;
Zhao, Yu ;
Gu, Lijian ;
Zou, Binglin ;
Wang, Ying ;
Cao, Xueqiang .
CORROSION SCIENCE, 2011, 53 (06) :2335-2343
[7]   Thermal cycling failure of new LaMgAl11O19/YSZ double ceramic top coat thermal barrier coating systems [J].
Chen, Xiaolong ;
Zhao, Yu ;
Fan, Xizhi ;
Liu, Yangjia ;
Zou, Binglin ;
Wang, Ying ;
Ma, Hongmei ;
Cao, Xueqiang .
SURFACE & COATINGS TECHNOLOGY, 2011, 205 (10) :3293-3300
[8]   Reactive coating of dolomite on alumina substrates [J].
deAza, AH ;
Pena, P ;
Moya, JS .
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 1997, 17 (07) :935-941
[9]  
DEJONGHE LC, 1984, J AM CERAM SOC, V67, P27, DOI 10.1111/j.1151-2916.1984.tb19141.x
[10]   Microstructure development in calcium hexaluminate [J].
Domínguez, C ;
Chevalier, J ;
Torrecillas, R ;
Fantozzi, G .
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2001, 21 (03) :381-387