The effect of V-shape protruded and dimple textured on the load-carrying capacity and coefficient of friction of hydrodynamic journal bearing: A comparative numerical study

被引:21
作者
Sharma, Sanjay [1 ]
Sharma, Aniket [1 ]
Jamwal, Gourav [1 ]
Kumar Awasthi, Rajeev [2 ]
机构
[1] Shri Mata Vaishno Devi Univ, Sch Mech Engn, Katra 182320, Jammu & Kashmir, India
[2] Beant Coll Engn & Technol, Dept Mech Engn, Gurdaspur, India
关键词
Surface texture; journal bearing; hydrodynamic lubrication; finite element method; Reynold's equation; PERFORMANCE;
D O I
10.1177/1350650120935007
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
The present comparative numerical study is between V-shape protruded, dimple textured, and untextured bearing. The performance parameters in terms of the load-carrying capacity and coefficient of friction are computed by solving governing Reynold's equation of the lubricant fluid flow. The governing equation is solved by the finite element method by assuming that the fluid is Newtonian and isoviscous in nature. The effect of eccentricity ratios, texture distribution, texture heights, and texture depths are considered for the analysis in both textured bearings. From simulated results, the load-carrying capacity and coefficient of friction is found to be maximum for protruded textured bearing in full textured region and first half-textured region respectively as compared to untextured bearings. Finally, optimal operating and geometrical parameters of textured bearing is obtained by computing performance enhancement ratio, which is the ratio of the load-carrying capacity to the coefficient of friction. The maximum value of the performance enhancement ratio is found for protruded and dimple textured bearing in full texturing and second half-region corresponding to the eccentricity ratio of 0.8 and 0.6 respectively at texture height and depth of 0.4.
引用
收藏
页码:997 / 1011
页数:15
相关论文
共 17 条
[1]   Finite element analysis of orifice-compensated multiple hole-entry worn hybrid journal bearing [J].
Awasthi, R. K. ;
Jain, S. C. ;
Sharma, Satish C. .
FINITE ELEMENTS IN ANALYSIS AND DESIGN, 2006, 42 (14-15) :1291-1303
[2]  
Awasthi RK, P 4 INT C IND TRIB, P501
[3]   A Laser Surface Textured Journal Bearing [J].
Brizmer, V. ;
Kligerman, Y. .
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 2012, 134 (03)
[4]   A COMPARISON BETWEEN 2 NUMERICAL TECHNIQUES FOR HYDRODYNAMIC JOURNAL BEARING PROBLEMS [J].
CHANDRAWAT, HN ;
SINHASAN, R .
WEAR, 1987, 119 (01) :77-87
[5]   Computational fluid dynamics analysis of a journal bearing with surface texturing [J].
Cupillard, S. ;
Glavatskih, S. ;
Cervantes, M. J. .
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2008, 222 (J2) :97-107
[6]   A STUDY OF EHD LUBRICATION IN A JOURNAL BEARING WITH PIEZOVISCOUS LUBRICANTS [J].
JAIN, SC ;
SINHASAN, R ;
SINGH, DV .
ASLE TRANSACTIONS, 1984, 27 (02) :168-176
[7]  
Jamwal G, 2019, IND LUBR TRIBOL
[8]   Influence of couple stress lubricant on the performance of textured two-lobe slot-entry hybrid journal bearing system [J].
Khatri, Chandra B. ;
Sharma, Satish C. .
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2017, 231 (03) :366-384
[9]   Effect of geometric shape of micro-grooves on the performance of textured hybrid thrust pad bearing [J].
Kumar, Vivek ;
Sharma, Satish C. .
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2019, 41 (11)
[10]   Effect of compound dimple on tribological performances of journal bearing [J].
Meng, F. M. ;
Zhang, L. ;
Liu, Y. ;
Li, T. T. .
TRIBOLOGY INTERNATIONAL, 2015, 91 :99-110