The fatigue behaviors of butt welds ground flush in the super-long life regime

被引:20
作者
Zhao Xiaohui [1 ]
Wang Dongpo [1 ]
Deng Caiyan [1 ]
Liu Yu [1 ]
Song Zongxian [1 ]
机构
[1] Tianjin Univ, Sch Mat Sci & Engn, Tianjin 300072, Peoples R China
基金
美国国家科学基金会;
关键词
Welding; Defect; Crack; Fatigue; HIGH-CYCLE FATIGUE; BEARING STEEL; FAILURE; MECHANISM; STRENGTH; INCLUSION;
D O I
10.1016/j.ijfatigue.2011.09.009
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
The fatigue properties of EH36 steel and butt welds ground flush in the super-long life regime were studied in this paper. Experimental results indicate that fatigue fracture may still occur during 10(8)-10(10) cycles, which is incompatible with conventional method of using the fatigue strength corresponding to 1 x 10(7) cycles to design welding structure serving in the super-long life regime. Scanning electron microscope analysis shows that fatigue crack mainly initiates from internal defects in the fusion face for butt welds ground flush. A new kind of "fish-eye" is found in welded joints. The relation between fatigue life and area of defects in the butt welds ground flush is confirmed. (C) 2011 Elsevier Ltd. All rights reserved.
引用
收藏
页码:1 / 8
页数:8
相关论文
共 26 条
[1]   Gigacycle fatigue properties of 1800 MPa class spring steels [J].
Abe, T ;
Furuya, Y ;
Matsuoka, S .
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2004, 27 (02) :159-167
[2]  
Bathias C, 1999, FATIGUE FRACT ENG M, V22, P559, DOI 10.1046/j.1460-2695.1999.00183.x
[3]  
Bathias C, 2001, INT J FATIGUE, V23, pS143, DOI 10.1016/S0142-1123(01)00123-2
[4]   Failure mechanisms of automotive metallic alloys in very high cycle fatigue range [J].
Bayraktar, Emin ;
Garcias, Israel Marines ;
Bathias, Claude .
INTERNATIONAL JOURNAL OF FATIGUE, 2006, 28 (11) :1590-1602
[5]   Ultra-long cycle fatigue of high-strength carbon steels part II: estimation of fatigue limit for failure from internal inclusions [J].
Chapetti, MD ;
Tagawa, T ;
Miyata, T .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 356 (1-2) :236-244
[6]  
Fukumoto S., 1991, P 1991 VAC MET C MEL, P3
[7]  
Hadrboletz A, 1997, INT MATER REV, V42, P1, DOI 10.1179/095066097790326029
[8]  
Hong YS, 2009, ACTA METALL SIN, V45, P769
[9]  
K Asami, 1985, HEAT TREATMENT TECHN, V25, P147
[10]   An understanding of very high cycle fatigue of metals [J].
Marines, I ;
Bin, X ;
Bathias, C .
INTERNATIONAL JOURNAL OF FATIGUE, 2003, 25 (9-11) :1101-1107