The motion of solid particles in a fluid in a nonlinear ultrasonic standing wave

被引:4
作者
Aksenov, A. V. [1 ]
Petrov, A. G. [1 ]
Shunderyuk, M. M. [1 ]
机构
[1] Moscow MV Lomonosov State Univ, Moscow 119899, Russia
基金
俄罗斯基础研究基金会;
关键词
Shock Wave; Cavitation; Solid Particle; Standing Wave; Integro Differential Equation;
D O I
10.1134/S1028335811070019
中图分类号
O3 [力学];
学科分类号
08 ; 0801 ;
摘要
The motion of solid particles in a fluid in a nonlinear ultrasonic standing wave was examined. The effect of focusing the solid particles is used in the facility for the separation of finely dispersed particles. The flow of small-diameter solid particles enters the central channel from the right and from the left. The central channels had the width λ/2 = 1.2 × 10-2 cm and λ/2 = 3.5 × 10-2 cm for the resonant frequencies f = 6.17 × 106 Hz and f = 2.11 × 106 Hz, respectively. The channel is separated into three parts, namely, two side channels and one central channel. The particles are concentrated in the middle of the pipe under the effect of the standing wave. The fluid flowing along the central channel collects all the solid particles, while it turns out that the solid particles are removed from the fluid flowing along the side channels.
引用
收藏
页码:379 / 384
页数:6
相关论文
共 50 条
[41]   Nonlinear motion of an oscillating bubble immersed in a magnetic fluid [J].
Malvar, S. ;
Gontijo, R. G. ;
Cunha, F. R. .
JOURNAL OF ENGINEERING MATHEMATICS, 2018, 108 (01) :143-170
[42]   Motion of a hot spheroidal solid particle in a viscous fluid [J].
Malai N.V. ;
Shchukin E.R. ;
Yalamov Yu.I. .
Fluid Dynamics, 2001, 36 (6) :1014-1018
[43]   Behaviour of self-arranged chain of colloidal particles in a travelling standing wave [J].
Zemanek, Pavel ;
Siler, Martin ;
Cizmar, Tomas .
18TH CZECH-POLISH-SLOVAK OPTICAL CONFERENCE ON WAVE AND QUANTUM ASPECTS OF CONTEMPORARY OPTICS, 2012, 8697
[44]   A Ring Type Standing Wave Ultrasonic Motor Using Cantilever Type Bending Transducer [J].
Chen, Weishan ;
Liu, Yingxiang ;
Liu, Junkao ;
Shi, Shengjun .
E-ENGINEERING & DIGITAL ENTERPRISE TECHNOLOGY VII, PTS 1 AND 2, 2009, 16-19 :293-297
[45]   Characteristic matching between stator and rotor in standing-wave-type ultrasonic motors [J].
Jin, Jiamei ;
Zhao, Chunsheng .
JOURNAL OF ELECTROCERAMICS, 2008, 20 (3-4) :197-202
[46]   Characteristic matching between stator and rotor in standing-wave-type ultrasonic motors [J].
Jiamei Jin ;
Chunsheng Zhao .
Journal of Electroceramics, 2008, 20 :197-202
[47]   Precise spatial control of cavitation erosion in a vessel phantom by using an ultrasonic standing wave [J].
Shi, Aiwei ;
Huang, Peixuan ;
Guo, Shifang ;
Zhao, Lu ;
Jia, Yingjie ;
Zong, Yujin ;
Wan, Mingxi .
ULTRASONICS SONOCHEMISTRY, 2016, 31 :163-172
[48]   A ring type standing wave ultrasonic motor using cantilever type longitudinal transducers [J].
刘英想 ;
刘军考 ;
陈维山 ;
石胜君 .
Journal of Harbin Institute of Technology(New series), 2011, (01) :52-56
[49]   Finite element modeling and analysis on contact characteristics of a standing wave linear ultrasonic motor [J].
Jiang, Chunrong ;
Xue, Xinyan ;
Lu, Danhong ;
Jin, Long .
Zhendong yu Chongji/Journal of Vibration and Shock, 2024, 43 (16) :42-50
[50]   Influence of working fluid on the performance of a standing-wave thermoacoustic prime mover [J].
Hao, X. H. ;
Ju, Y. L. ;
Behera, Upendra ;
Kasthurirengan, S. .
CRYOGENICS, 2011, 51 (09) :559-561