The influence of high-strength bolt preload loss on structural mechanical properties

被引:22
作者
Kong, Qingzhao [1 ]
Li, Yang [1 ]
Wang, Shuyin [1 ]
Yuan, Cheng [1 ]
Sang, Xiaohan [1 ]
机构
[1] Tongji Univ, Coll Civil Engn, Shanghai, Peoples R China
关键词
High strength bolt; Stiffness; Preload loss; DIC system; Experimental analysis; Theoretical calculation; BEHAVIOR; JOINTS;
D O I
10.1016/j.engstruct.2022.114955
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
High-strength friction bolts in engineering are affected by corrosion, fatigue and other factors in long-term use, and preload loss is a common phenomenon in engineering. In order to study the influence of the preload loss of high strength bolt group on the basic mechanical properties of structures, a flexural test of steel beams connected by high strength friction bolt group was numerically and experimentally investigated in this study. The variable between each specimen is the preload value of the high-strength bolt group. To this end, the strength of bolt connection, the rotational stiffness of the whole structure and the local joint, the deformation distribution of the structure, slippage curves, cross-section strain and ultimate bearing capacity are evaluated and discussed. In addition, the mechanics of the structure at different sliding stages are theoretically calculated. The research results show that the preload of the high-strength bolt group loss will reduce the connection strength and structure stiffness, but has very limited influence on the ultimate bearing capacity of the structure.
引用
收藏
页数:16
相关论文
共 33 条
[1]   Clamping force loss of high-strength bolts as a result of bolt head corrosion damage: Experimental research A [J].
Ahn, Jin-Hee ;
Lee, Jae Min ;
Cheung, Jin-Hwan ;
Kim, In-Tae .
ENGINEERING FAILURE ANALYSIS, 2016, 59 :509-525
[2]  
[Anonymous], 2012, GB 50755-2012
[3]  
[Anonymous], 2017, 500172017 GB
[4]  
[Anonymous], 2010, 36010 AISC
[5]   Assessment of existing steel railway bridges [J].
Caglayan, Ozden ;
Ozakgul, Kadir ;
Tezer, Ovunc .
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2012, 69 (01) :54-63
[6]   Experimental analysis of bolted connections: Snug versus preloaded bolts [J].
Faella, C ;
Piluso, V ;
Rizzano, G .
JOURNAL OF STRUCTURAL ENGINEERING-ASCE, 1998, 124 (07) :765-774
[7]   Cyclic behavior of bolted connections with different arrangement of bolts [J].
Gerami, Mohsen ;
Saberi, Harnid ;
Saberi, Vahid ;
Daryan, Amir Saedi .
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2011, 67 (04) :690-705
[8]   Experimental study on fatigue performance of Q460 and Q690 steel bolted connections [J].
Guo, Hongchao ;
Mao, Kuanhong ;
Liu, Yunhe ;
Liang, Gang .
THIN-WALLED STRUCTURES, 2019, 138 :243-251
[9]   Experimental and numerical study on the mechanical behavior of Q460D high-strength steel bolted connections [J].
Guo, Hongchao ;
Xiao, Feng ;
Liu, Yunhe ;
Liang, Gang .
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2018, 151 :108-121
[10]   Load-bearing capacity of occlusive high-strength bolt connections [J].
Guo, Xiaonong ;
Zhang, Yan ;
Xiong, Zhe ;
Xiang, Yang .
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2016, 127 :1-14