Hollow fibers of yttria-stabilized zirconia (8YSZ) prepared by calcination of electrospun composite fibers

被引:26
|
作者
Li, J. Y. [1 ]
Tan, Y. [1 ]
Xu, F. M. [1 ]
Sun, Y. [1 ]
Cao, X. Q. [2 ]
Zhang, Y. F. [2 ]
机构
[1] Dalian Univ Technol, Sch Mat Sci & Engn, Dalian 116024, Peoples R China
[2] Chinese Acad Sci, Changchun Inst Appl Chem, Key Lab Rare Earth Chem & Phys, Changchun 130022, Jilin, Peoples R China
关键词
yttria-stabilized zirconia; ceramic; fibers; electrospinning; sintering;
D O I
10.1016/j.matlet.2007.12.011
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
8YSZ fibers were synthesized by calcination of PVP/zirconium oxychloride/yttrium nitrate composite fibers (PVP-Precursor) obtained by electrospinning. Scanning electron microscopy (SEM) indicated that the 8YSZ fibers are hollow and the gas released during organic binder decomposition resulted in the formation of hollow center in fibers. Proper controlling heating rate is necessary to the formation of hollow structure. Both X-ray diffraction (XRD) and Raman spectroscopy analysis indicated that the 8YSZ fibers have crystal structure of tetragonal phase. The hollow structure should make the fibers to have a higher resistance to sintering than solid fibers at elevated temperature. This result has important applications in catalytic combustion. (c) 2007 Elsevier B.V. All rights reserved.
引用
收藏
页码:2396 / 2399
页数:4
相关论文
共 50 条
  • [1] Continuous yttria-stabilized zirconia fibers
    Clauss, B
    Grub, A
    Oppermann, W
    ADVANCED MATERIALS, 1996, 8 (02) : 142 - +
  • [2] Continuous yttria-stabilized zirconia fibers
    Clauss, Bernd
    Grueb, Andrea
    Oppermann, Wilhelm
    VCH Gesellschaft GmbH, Weinheim, Germany (08):
  • [3] Fabrication, microstructure, and properties of 8 mol% yttria-stabilized zirconia (8YSZ) transparent ceramics
    Chen, Penghui
    Li, Xiaoying
    Tian, Feng
    Liu, Ziyu
    Hu, Dianjun
    Xie, Tengfei
    Liu, Qiang
    Li, Jiang
    JOURNAL OF ADVANCED CERAMICS, 2022, 11 (07) : 1153 - 1162
  • [4] Electrical Conductivity of Boron Oxide-Doped Yttria-Stabilized Cubic Zirconia (8YSZ)
    Aktas, B.
    Tekeli, S.
    ACTA PHYSICA POLONICA A, 2015, 127 (04) : 1380 - 1383
  • [5] Microstructure and Phase Composition of Yttria-Stabilized Zirconia Nanofibers Prepared by High-Temperature Calcination of Electrospun Zirconium Acetylacetonate/Yttrium Nitrate/Polyacrylonitrile Fibers
    Rodaev, Vyacheslav V.
    Razlivalova, Svetlana S.
    Tyurin, Alexander, I
    Zhigachev, Andrey O.
    Golovin, Yuri, I
    FIBERS, 2019, 7 (10)
  • [6] Nanocrystalline yttria-stabilized zirconia fibers from plant fibers and their polymer composites
    Das, Rabindra N.
    Nad, Sanjukta
    Pramanik, Panchanan
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2008, 91 (03) : 1034 - 1036
  • [7] Preparation of yttria-stabilized zirconia fibers from a zirconia sol and their properties
    Shida, Kenji
    Ohara, Yusuke
    Matsuda, Motohide
    Suyama, Yoko
    JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 2012, 120 (1407) : 478 - 482
  • [8] Crystallization kinetics and growth mechanism of 8 mol% yttria-stabilized zirconia(8YSZ) nano-powders prepared by a sol-gel process
    Kuo, Chih-Wei
    Lee, Yueh-Hsun
    Hung, I-Ming
    Wang, Moo-Chin
    Wen, Shaw-Bing
    Fung, Kuan-Zong
    Shih, Chi-Jen
    JOURNAL OF ALLOYS AND COMPOUNDS, 2008, 453 (1-2) : 470 - 475
  • [9] SINTERING BEHAVIOR OF YTTRIA-STABILIZED ZIRCONIA (YSZ) POWDERS PREPARED BY HOMOGENEOUS PRECIPITATION
    KATO, A
    INOUE, K
    KATATAE, Y
    MATERIALS RESEARCH BULLETIN, 1987, 22 (09) : 1275 - 1281
  • [10] The Influence of Plasma Composition in the Thermal Cyclic Performance of Yttria-Stabilized Zirconia (8YSZ) Thermal Barrier Coatings (TBCs)
    Bruno Guerreiro
    Rogerio S. Lima
    Nicholas Curry
    Matthias Leitner
    Karl Körner
    Journal of Thermal Spray Technology, 2021, 30 : 59 - 68