Influence of Mn-Ni alloying elements on surface film and pitting resistance of Cr-Mn austenitic stainless steels

被引：14
|
作者：
Qu, H. P. [1 ]
Chen, H. T. [1 ]
Lang, Y. P. [1 ]
机构：
[1] CISRI, Inst Special Steels, 76 Haidiannan Rd, Beijing, Peoples R China
来源：
CONSTRUCTION AND BUILDING MATERIALS | 2016年 / 125卷
关键词：
Stainless steel; XPS; Argon sputter; Passive film; Pitting potential; PASSIVE FILM; CORROSION BEHAVIOR; HIGH-TEMPERATURE; XPS; CHLORIDE; AES; INCLUSIONS; MANGANESE;
D O I：
10.1016/j.conbuildmat.2016.08.059
中图分类号：
TU [建筑科学];
学科分类号：
0813 ;
摘要：
This research focused on surface film and corrosion resistance of three commercial type 200 austenitic stainless steels including L4, L1 and LH with different Mn/Ni mass ratio in Chinese market. X-ray photoelectron spectrum (XPS) results showed that Fe, Cr and Mn oxide layer thickness and passive film thickness were reduced as Mn/Ni mass ratio increased. Mn enrichment was only found in LH passive film. Mn oxide percentage in LH passive film was also the highest. These disadvantages deteriorated pitting resistance of LH, which was proved by anodic polarization result. Mn/Ni mass ratio should not be higher than 1.7 to ensure good corrosion resistance and low raw material cost. (C) 2016 Elsevier Ltd. All rights reserved.
引用
收藏
页码：427 / 437
页数：11
相关论文
共 50 条
  • [41] Study on the Mechanical Performance of Dissimilar Butt Joints between Low Ni Medium-Mn and Ni-Cr Austenitic Stainless Steels Processed by Gas Tungsten Arc Welding
    Ibrahim, I. Reda
    Khedr, Mahmoud
    Mahmoud, Tamer S.
    Abdel-Aleem, Hamed A.
    Hamada, Atef
    METALS, 2021, 11 (09)
  • [42] Copper content effects on passive film of modified 00Cr20Ni18Mo6CuN super austenitic stainless steels in acidic environment
    Li, Bingbing
    Lang, Yuping
    Chen, Haitao
    Mi, ZhiShan
    Sun, Xu
    Qu, Huapeng
    Feng, Hanqiu
    Tian, Zhiling
    HELIYON, 2023, 9 (02)
  • [43] The Effect of Replacing Ni with Mn on the Microstructure and Properties of Al2O3-Forming Austenitic Stainless Steels: A Review
    Chen, Guoshuai
    Du, Shang
    Zhou, Zhangjian
    MATERIALS, 2024, 17 (01)
  • [44] Influence of Temperature on the Corrosion Behavior of 18Mn-18Cr Austenitic Stainless Steel in 3.5 wt.% NaCl Solution
    Chen, Junping
    Zhou, Qiongyu
    Liu, Yu
    Ma, Yanhui
    Yin, Jianfen
    Hu, Te
    Li, Yuanyuan
    INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, 2022, 17 (10):
  • [45] Ni and Mn enrichment effects on reformed austenite: thermodynamical and low cycle fatigue stability of 13%Cr–4%Ni and 13%Cr–6%Ni stainless steels
    Stéphane Godin
    Johann Hamel-Akré
    Denis Thibault
    Alessandra-Maria Serventi
    Philippe Bocher
    SN Applied Sciences, 2020, 2
  • [46] A Comparative Study of Semiconducting Behavior of Passive film of High Nitrogen and Ni and Mn free Stainless Steels in 3.5 wt. % NaCl
    Arya, S. B.
    Raja, V. S.
    Tiwari, A. N.
    CENTURY OF STAINLESS STEELS, 2013, 794 : 626 - +
  • [47] Effect of N and C on stress corrosion cracking susceptibility of austenitic Fe18Cr10Mn-based stainless steels
    Yoon, Young-Sub
    Ha, Heon-Young
    Lee, Tae-Ho
    Kim, Sangshik
    CORROSION SCIENCE, 2014, 80 : 28 - 36
  • [48] Mechanism research on accelerated embrittlement phenomenon of a warm deformed Cr-Mn-Ni-Mo-N austenitic stainless steel
    Qu, H. P.
    Chen, H. T.
    Cao, C. X.
    Lang, Y. P.
    Zhang, S. X.
    Cui, Y.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 680 : 1 - 12
  • [49] Effects of minor alloying elements (Si, Mn and Al) on the corrosion behavior of stainless steels in molten carbonate fuel cell cathode environment
    Ahn, SooHoon
    Kim, MinJoong
    Kim, YoungJun
    Youn, JuYoung
    CORROSION REVIEWS, 2024, 42 (01) : 85 - 92
  • [50] Influence of Induction Treatment on the Pitting Corrosion Resistance of Non-Standard Low-Ni High-Mn-N Duplex Stainless Steel Coating
    Wang, Zirui
    Bao, Yefeng
    Song, Qining
    Jiang, Yongfeng
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2023, 32 (03) : 1440 - 1451
12345