Determination of Phase Equilibria among δ-Fe, γ-Fe and Fe2M Phases in Fe-Cr-M (M: Hf, Ta) Ternary Systems

被引:3
作者
Yuan, Zhetao [1 ]
Kobayashi, Satoru [1 ]
机构
[1] Tokyo Inst Technol, Dept Mat Sci & Engn, Meguro Ku, 2-12-1 Ookayama, Tokyo 1528552, Japan
基金
日本学术振兴会;
关键词
phase diagram; 9Cr-based heat-resistant ferritic steels; laves phase; interphase precipitation; fibrous precipitation; LAVES PHASE; PRECIPITATION; STEELS; CREEP;
D O I
10.3390/met12010102
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Phase equilibria among delta-Fe, gamma-Fe, and Fe2M phases in the Fe-Cr-M (M: Hf, Ta) ternary systems were determined using bulk alloys heat-treated at high temperatures. The final goal of this study is to develop novel ferritic heat resistant steels strengthened by precipitation of Fe2M phase on the eutectoid type reaction path: delta -> gamma + Fe2M. The phases present in heat-treated samples were identified by microstructural characterization and X-ray diffraction pattern analysis. The chemical compositions of the phases were analyzed by energy dispersive spectroscopy. A pseudo-eutectoid trough (delta -> gamma + Fe2M) exists at ~1220 degrees C at a Hf content of 0.1% and at ~1130 degrees C at a Ta content of 0.6% on the vertical section at a Cr content of 9.5% in each ternary system, respectively. A thermodynamic calculation with a database that reflects reported binary phase diagrams and the present study indicates that an increase in the Cr content decreases the temperature and the Hf/Ta contents of the pseudo-eutectoid troughs. The determined phase equilibria suggest that the supersaturation of Hf/Ta for the formation of gamma phase is higher in the Hf doped system than in the Ta doped system, which is probably an origin of a much slower kinetics of precipitation on the eutectoid path in the latter system.
引用
收藏
页数:10
相关论文
共 17 条
  • [1] Effect of fine precipitation and subsequent coarsening of Fe2W laves phase on the creep deformation Behavior of tempered martensitic 9Cr-W steels
    Abe, F
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2005, 36A (02): : 321 - 332
  • [2] [Anonymous], Key World Energy Statistics 2016
  • [3] EFFECTS OF TA AND NB ON MICROSTRUCTURES AND MECHANICAL-PROPERTIES OF LOW ACTIVATION FERRITIC 9CR-2W-0.2V STEEL FOR FUSION-REACTOR
    ASAKURA, K
    YAMASHITA, Y
    YAMADA, T
    SHIBATA, K
    [J]. ISIJ INTERNATIONAL, 1990, 30 (11) : 937 - 946
  • [4] Cullity B. D., ELEMENTS XRAY DIFFRA
  • [5] EDMONDS DV, 1972, J IRON STEEL I, V210, P363
  • [6] Novel hafnium containing steels for power generation
    Grice, R. J.
    Faulkner, R. G.
    Yin, Y.
    [J]. IRONMAKING & STEELMAKING, 2009, 36 (03) : 170 - 175
  • [7] Hari K.C. Kumar, 1989, J ALLOY PHASE DIAGRA, V5, P77
  • [8] Effect of Different Precipitation Routes of Fe2Hf Laves Phase on the Creep Rate of 9Cr-Based Ferritic Alloys
    Kobayashi, Satoru
    Hara, Toru
    [J]. APPLIED SCIENCES-BASEL, 2021, 11 (05): : 1 - 13
  • [9] Formation of the Fe2Hf Laves Phase Along the Eutectoid-type Reaction Path of δ-Fe→γ-Fe+Fe2Hf in an Fe-9Cr Based Alloy
    Kobayashi, Satoru
    Hibaru, Takaaki
    [J]. ISIJ INTERNATIONAL, 2015, 55 (01) : 293 - 299
  • [10] Interphase precipitation of Fe2Hf Laves phase in a Fe-9Cr/Fe-9Cr-Hf diffusion couple
    Kobayashi, Satoru
    Kimura, Kazuhiro
    Tsuzaki, Kaneaki
    [J]. INTERMETALLICS, 2014, 46 : 80 - 84